TRAINING GAS TURBINE OPERATION & MAINTENANCE

TRAINING GAS TURBINE OPERATION & MAINTENANCE

TRAINING GAS TURBINE OPERATION & MAINTENANCE

Training Perawatan Dan Operasional Gas Turbine

Training Pengenalan Gas Turbine

training perawatan dan operasional gas turbine murah

INTRODUCTION :
Gas turbine in oil and gas used for gas plant and power plant facilities, both of plant are critical plant to append activity of production and delivery system of oil and gas. Reliability and deliverability is more important factor to provide effectiveness system after all.

OBJECTIVE :
After the course participant :
1. Have a good knowledge of gas turbine out and technology include thermodynamic concepts, construction, detail component’s and function
2. Will improve their ability to understand cause and effect of failure to guide root cause analysis in problem solving and trouble shooting
3. Familiar with product of gas turbine which is used in the gas plant

TRAINING MATERIAL OUTLINE :
1. Introduction to Gas turbine
2. An Overview of Gas Turbines
a. History of gas turbine
b. Gas turbine in oil and gas industry
3. Brayton cycle
4. Gas turbine art and design
5. Engine  design
6. Operation principle
7. Engine case and inlet air
8. Gas turbine in detail assembly and function of components
a. Compressor section    : Inlet guide vane, Rotor compressor,Stator Compressor,Bleed Valve and  control.
b. Diffuser and Combustor    : Combustion chamber, Fuel Nozzle,Ignition plug
c. Turbine  and exhaust    :  Inlet nozzle, Blade turbine and cooling system
9. Auxiliary Components and Accessories : Bearings and Seals, Gears
10. Gas turbine bearing and lubrication system
+ Ingition system
+ Bearing and seals
+ Fuel gas and gas system
11. Basic combustion in gas turbine
+ Heating value in natural gas (LHV and HHV), Wobb number
+ Stochiometric combustion
+ Emission of combustion
+ How gas burned in combustion chamber
+ Cooling technology and thermal barrier coating
12. Compressor in gas turbine
a. Energy convertion in compressor
13. How compressor work (increase pressure and flowing gas)
+ Gas flow compressor  phenomena stall and surge,
+ How to control  control surge  ( IGV and bleed valve)
+ Compressor failure and material
14. Turbine who it works
+ Convert Pressure and temperature to Mechanical energy
+ How blade turbine work
+ Internal cooling and coating
+ Failure in turbine component
15. Gas turbine operation and control
+ Operation gas turbine for gas compressor
+ Operation gas turbine for Power Generation
+ Fuel control system
+ IGV control system
+ Lubrication control system

Pembicara / Fasilitator
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT.
Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia  2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024

Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024

Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024

Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024

Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024

Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024

Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,