TRAINING PIPING DESIGN AND MATERIAL SELECTION

TRAINING PIPING DESIGN AND MATERIAL SELECTION

TRAINING PIPING DESIGN AND MATERIAL SELECTION

Training Desain Perpipaan Dan Pelatihan Pemilihan Bahan

Training Piping Stress Guide Line

training desain perpipaan dan pelatihan pemilihan bahan murah

Piping Design and Material Selection Training merupakan suatu program training  yang diberikan kepada Piping Designer, Field Engineer, Project Engineer, Maintenance Engineer, Mechanical Enginer, Piping Supervisor , dan pihak pihak yang terkait dan memiliki system pemipaan.

Workshop ini akan memberikan dasar dasar perhitungan dan pemilihan material untuk berbagai system pemipaan :
* Piping Design :

* Pipe Sizing.
* Pipe Strength Calculation (Required Minimum Wall Thickness),
* Pressure Drop Calculation
* Piping Stress Guide Line
* Pipe Support.
* Pipe Insulation
* Pipe Material Selection Guide.
* Fitting Material Selection Guide
* Valve Selection Guide
* Piping Special Material (Steam trap, Strainer, Expansion Joint, Spring Hanger)

* Piping Material Selection :

Silabus :
* Process Piping (ASME B.31.3)
* Valve Selection Hand Book , Fourth Edition, R.W. Zappe,
* Facility Piping System Hand Book, Second Edition, Michael Frankel.
* Power Piping (ASME B31.1)

* Pipe Hanger and Support – Selection  and Application (MSS – Standard Practice -68)

Metode :

Metode yang digunakan:  Class Room ,simulasi Foto, diskusi dan ceramah.

Workshop Leader :

Arif Yudianto ,ST.

Telah memiliki pengalaman 7 tahun dibidang operasional dan maintenance pompa, 7 tahun di bidang engineering (pumps selection and sizing)  dan 3 tahun di bidang konstruksi (installasi & Commissioning) . Pada tahun 1997 pernah menerima training khusus tentang Steam Turbine di Workshop Siemens, Gorlitz, Germany memberikan dasar  yang kuat untuk mengembangkan pendalamannya di bidang Rotating Mesin termasuk Pompa dan Steam Turbine. Sejak tahun 1998 memberikan inhouse training ke teknisi mekanik , beberapa trainee berhasil menjadi teknisi yang berkualitas internasional dan mengerjakan beberapa pekerjaan perbaikan di luar negeri.

Arif Yudianto berlatar belakang pendidikan Teknik Mesin  dari ITS.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING PIPING & PIPELINE

TRAINING PIPING & PIPELINE

TRAINING PIPING & PIPELINE

Training Pipa & Pipa

Training Development Well

training pipa & pipa murah

ABSTRAK

Ketika pertama kali memasuki dunia industry perminyakan dengan memiliki background berbagai disiplin ilmu, seringkali kita mendapatkan mereka gagap terhadap technology ini, untuk itu pelatihan ini didesain untuk mereka yang baru saja memasuki dunia industry perminyakan untuk dapat menjadi jembatan ketika memasuki  lapangan kerja mereka dalam industry perminyakan ini. Peserta akan mendapatkan pemahaman “lengkap”secara garis besar tentang industri perminyakan, termasuk belajar mengenai hal seperti geologi, pemboran, reservoir, completions, surface facilities, artificial lift, secondary recovery, EOR dan perhitungan ekonomisnya.

OUTLINE
1. History of Oil Industry.
2. Source Rock.
3. Oil & Gas Trapping.
4. Oil & Gas Exploration.
5. Wild Cat Well.
6. Development Well.
7. Introduction to Drilling Operation & Equipment.
8. Oil & Gas Well Testing.
9. Introduction to Production Operation & Equipment.
10. Oil & Gas Processing.
11. Oil & Gas Field Management.
12. Introduction to Reserve Calculation.
13. Economic Analysis.

INSTRUCTOR
Ir. Y. Agus Jayatun, MT

Expert in Mechanical Vibration, Piping Engineering, and Maintenance Engineering. S2, Mechanical Engineering – UGM, Yogyakarta. PII Professional Engineer of Mechanical Engineering (Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical).

PARTICIPANT
Finance, Material /Logistic, Legal Employees, mechanical, electrical, chemist, other non-petroleum engineer  background.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING PIPING SYSTEM & PIPELINE INTEGRITY

TRAINING PIPING SYSTEM & PIPELINE INTEGRITY

TRAINING PIPING SYSTEM & PIPELINE INTEGRITY

Training Sistem Pipa & Integritas Pipa

Training Fundamentals Of Maintenance And Integrity

training sistem pipa & integritas pipa murah

DESCRIPTION

Piping is a system of pipes used to convey fluids (liquids and gases) from one location to another. The process of fluid transportation using pipelines is nearly as human history and transportation systems have always required maintenance to preserve their structural integrity. The operations of a pipeline is a complex system that involves numerous steps and use of technology. Pipeline integrity means that the pipeline and all its related components are running properly. When pipelines are not operating properly, it poses a risk to public safety as well as pipeline company employees and other workers. Pipeline integrity is maintained through proper design and construction, monitoring and inspections and maintenance protocols.

This  training is designed to provide a comprehensive understanding of applied piping and pipeline technology: design aspects of piping & pipeline system, selection of materials and types of pipes, flanges, valves and fittings, handling of those materials, welding & installation techniques andprocedures, and the operation, inspection and maintenance of piping and pipeline systems. Otherhands also provide understanding pipeline integrity to analyze a degraded condition due to either corrosion or mechanical damage.

OBJECTIVES
* The Participant will gain an in-depth knowledge of pipe and fitting material specifications, fabrication process and influence on mechanical properties of strength and toughness, to help in material selection and failure analysis.
* The participant will understand the technical background to the design equations, and their application to the design of piping systems and pipelines. The course addresses rules of good practice in layout of piping systems for reliable operation.
* The participant will gain a practical understanding of piping and pipeline corrosion mechanisms, how to recognize them, classify them and resolve them.
* The participant will learn risk assessment for piping & pipeline i.e. probability of failure and their consequences if failures occur.
* The participant will be introduced to the latest techniques and research in piping and pipeline integrity to analyze a degraded condition due to either corrosion or mechanical damage.
* The participants will review case histories of field failures and will evaluate their cause and solutions to avoid recurrence.

WHO SHOULD ATTEND
* Piping and Pipeline Engineers
* Operation Engineers
* Maintenance Engineers
* Production Engineers
* Technical Supports Engineers
* Technical Staffs
* Everyone who want to know and have interest in piping and pipeline system

COURSE OUTLINE PIPING SYSTEM & PIPELINE INTEGRITY

Introduction
* History of Pipeline Technology
*  Fundamentals of Maintenance and Integrity

Materials Selection
* Metallurgical Properties
* Chemistry and Material
* Linepipe manufacturing
* Fabrication and Fittings specification
* Mechanical Properties: Strength and Toughness
* Material selection technique

Strength Integrity for Sustained Loads
* Operating and Design Pressure
* How to Establish the System Design Pressure
* Introduction to Pressure Relief Valves
* Pipe and Pipeline Sizing Formula with Applications
* Rules of Good Practice in layout
* Pump and Compressor Piping
* How to Support a piping System
* Review of Support Types and their Application
* Lesson learned from Poor Support Practices
* Temperature Effects
* Flexibility Layout Analysis
* Temperature Transients and Fatigue Damage
* Vibration In Service
* Mechanical and Hydraulic Induced Vibration in Piping
* How to Measure Analyze Resolve Vibration

Strength Integrity for Occasional Loads
* Pressure Transients
* Recognizing and Solving Liquid Hammer
* Pump Station Transients
* Study of Pipeline Failures Due to Transient
*  Two-Phase Liquid -Vapor Transients
* Two-Phase Liquid-Gas Transients
*  Gas Discharge Transients
* Buried Pipe
* Soil Loads
* Surface Loads
* Expansion of Buried Pipe
* Soil settlement
* n-service Movement of Pipeline
* Pipeline Failures
* Understanding Why Failures Occur and How to Avoid Them

Corrosion Assessment and Protection
*  Introduction to Practical Corrosion
*  Classification of Corrosion Mechanisms
* General Wall Thinning
* Local Corrosion: Galvanic Effects
* Crevice Corrosion
* Pitting Corrosion
* Environmental Effects
* Hydrogen and H2S Effects
*  Microbiological Corrosion
* Corrosion Protection
* Cathodic Protection Overview

Corrosion Assessment and Protection
* Introduction to Practical Corrosion
* Classification of Corrosion Mechanisms
* General Wall Thinning
* Local Corrosion: Galvanic Effects
* Crevice Corrosion
* Pitting Corrosion
* Environmental Effects
* Hydrogen and H2S Effects
* Microbiological Corrosion
* Corrosion Protection
* Cathodic Protection

Risk Assessment Overview
* Introduction to risk assessment
* Risk Criteria
* Probability of failure
* Third party damage
* Corrosion aspects
* Design aspects
* Incorrect operation
* Consequence of failure
* Product hazard
* Spill assessment
* Dispersion calculation
* Receptors
* Risk Representation

Maintenance & repair
* Flange and Mechanical Joints
* Overview of Different Types of Flanges and Application
* Causes of Flange Leaks and How to Resolve
* Case Study of Flange Failure
* Assembly of Flange Joints and Leak Tightness
* Pressure and Leak Testing
* The Difference Between Leak Testing and Pressure Testing
* Review of Difference Testing Techniques
* The Purpose of Hydro test
* How to Conduct a Hydro test
* Pipeline and Piping Systems Testing
* Pneumatic Testing
* Repair Techniques
* The New ASME Repair Standards
* The Fundamentals of Repair package
* Pipe and Component Replacement
* Grinding and welding
* Welded Sleeve: Type A and B

TRAINING METHOD
* Presentation
* Discussion
* Case Study
* Evaluation

TRAINER

Saripudin, ST. MT

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING POWER GAS TURBINE

TRAINING POWER GAS TURBINE

TRAINING POWER GAS TURBINE

Training Basics Operating Principles

Training Gas Turbine Principle

training basics operating principles murah

DESKRIPSI
Production continuity is a keyword in any process production activities, and power system play important role to keep all of the operation.
Gas turbine is known for its high power and high efficiency power generator with low volume engine. Its high energy, high speed rotation, etc., will become advantage if it’s operated and maintained properly. Gas turbine principle and performance however should be understood by operator and any person who get involved with them to increase performance of the operation, maintenance, safety, etc.

Tujuan Training:
In this training, gas turbine generator will be discussed from principle, application, components and its maintenance. Moreover, failure phenomena such as surge, stall, stonewall and their control system to improve safety will also be introduced.
After completion of this training participant will understand about the basic principle, application and control system that will help them for improving safety and problem solving on operation and maintenance activities.

MATERI
OUTLINE MATERI :
1.    Engineering Design
2.    Basics Operating Principles :
a.    Implementation and selection
b.    Energy conversion
c.    Engine Case – Air Inlet
d.    Compressor Section
e.    Diffuser & Combustion
f.    Turbine & Exhaust
3.    Turbine Components
4.    Bearings & Seals
5.    Lubrication & Lube Oil :
a.    Lube Oil Filters & Coolers
b.    Lube Oil Instrumentation
c.    Surging, stall, and stonewall
d.    Generator Control
6.    Fuel Systems
7.    Starting System
8.    Turbine control system
9.    Principles of Power Generator
10.    Generator Components

PESERTA
The training can be important for all personnel involved with the design, installation, maintenance, operation and servicing of gas turbine generator and their basic systems.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

· FREE Souvenir Exclusive

TRAINING POWER GAS TURBINE

TRAINING POWER GAS TURBINE

TRAINING POWER GAS TURBINE

Training Application And Control System

Training Turbine & Exhaust

training application and control system murah

DESKRIPSI

Production continuity is a keyword in any process production activities, and power system play important role to keep all of the operation.

Gas turbine is known for its high power and high efficiency power generator with low volume engine. Its high energy, high speed rotation, etc., will become advantage if it’s operated and maintained properly. Gas turbine principle and performance however should be understood by operator and any person who get involved with them to increase performance of the operation, maintenance, safety, etc.

TUJUAN

In this training, gas turbine generator will be discussed from principle, application, components and its maintenance. Moreover, failure phenomena such as surge, stall, stonewall and their control system to improve safety will also be introduced.

After completion of this training participant will understand about the basic principle, application and control system that will help them for improving safety and problem solving on operation and maintenance activities.

MATERI TRAINING POWER GAS TURBINE

* Engineering Design
* Basics Operating Principles :

1. Implementation and selection
2. Energy conversion
3. Engine Case – Air Inlet
4. Compressor Section
5. Diffuser & Combustion
6. Turbine & Exhaust

* Turbine Components
* Bearings & Seals
* Lubrication & Lube Oil :

1. Lube Oil Filters & Coolers
2. Lube Oil Instrumentation
3. Surging, stall, and stonewall
4. Generator Control

* Fuel Systems
* Starting System
* Turbine control system
* Principles of Power Generator
* Generator Components

Peserta

The training can be important for all personnel involved with the design, installation, maintenance, operation and servicing of gas turbine generator and their basic systems.

Metode

Presentasi, Diskusi , Studi Kasus

Instruktur

Ir. Paryana Puspaputra, M.Eng. and Team

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING PRACTICAL INTERNAL CORROSION CONTROL AND MONITORING IN OIL & GAS OPERATIONS

TRAINING PRACTICAL INTERNAL CORROSION CONTROL AND MONITORING IN OIL & GAS OPERATIONS

TRAINING PRACTICAL INTERNAL CORROSION CONTROL AND MONITORING IN OIL & GAS OPERATIONS

Training Praktik Pengendalian Dan Pemantauan Korosi Internal Dalam Operasi Minyak & Gas

Training Internal Corrosion Control As A Key Factor To Pipeline Integrity Management

training praktik pengendalian dan pemantauan korosi internal dalam operasi minyak & gas murah

Internal Corrosion Problems in Gas, Oil and Produced Water Pipeline and Equipment
* Piping and Pipeline Leakage due to Pitting Corrosion and Microbiological Induced Corrosion
* Severe Pipe Wall Thickness Reduction and Short Remaining Service Life caused by Sour Corrosion
* Pipe Wall, Rotating Parts and Equipment Cracking due to Chloride and Sulfide in the Fluids
* Internal Corrosion of Pipeline and Equipment due to Water in Oil and Oil in Water Emulsions
* Internal Corrosion due to Multi Phase Flow in the Pipeline
* Severe Corrosion Rate caused by CO2 and Hydrate in the Gas Lines, CO2/H2S Removal Unit and Glycol Dehydration Unit
* Internal Corrosion in the Water Lines due to Dissolved Oxygen, Mud and Sludge
* Malfunction of Pump, Compressor, Valves and Equipment due to Under-Deposit Corrosion, Under-Film Corrosion and Fouling

The Nature, Mechanism and Characteristics of Internal Corrosion and the Control Methods
* Anodic-Cathodic Reactions, Electrical Properties and Characteristics of Corrosion Cells
* Physical & Metallurgical Conditions of Metals and Chemical Composition that Promote Corrosion
* Destructive and Catastrophic Effects of Corrosive Agents and Microorganism in the Gas, Oil and Produced Water Fluids
* The Role and Mechanism of O2, CO2, H2S, Dissolved Salts and Microorganism in Internal Corrosion
* The Role of Oilfield Bacteria and the Mechanism of MIC
* Characteristics and Detection of Internal Corrosion in the Pipeline and Surface Equipment
* Removal of Dissolved Corrosive Agents and Non-Hydrocarbon Gases in the Gas, Oil and Produced Water Fluids
* Internal Corrosion Control with On-line Chemical Inhibitors Injection, Surface Barriers and Scavengers

Internal Corrosion Detection and Monitoring Techniques, Devices and Analysis
* Visual Inspection and Early Detection Techniques & Devices for Monitoring Fluid Corrosiveness and Tests for Identifying Corrosion products
* The Important of Internal Corrosion Rate Monitoring Before and After Chemical Injection and Treatment
* NACE Standard Method for Preparation, Installation, Laboratory Analysis and Interpretation of Results of Internal Corrosion Monitoring
* Access Fittings, Retrievers, Corrosion Coupons, Scale Coupons, Corrosion Probes, Holders, Injection & Sampling Devices and Instrument for On-line Internal Corrosion Monitoring
* The Use of Nipple or Spool, Hydrogen Probe and Galvanic Probe
* NACE Standard Method for Testing and Analysis of Bacterial Activity and Microbiological Induced Corrosion
* Iron Content Analysis of Produced Water and the COPRA Correlation
* Down-hole Tubing or Casing Calipers, Ultrasonic Wall Thickness Testers and Radiography

Internal Corrosion Control with Chemical Inhibitor Injection, Passive Film Formation and Biocides
* Nature & Classification of Inhibitors and Effect of Ionic Character on
* Inhibiting Ability
* Formulations of Oilfield Inhibitors and the use of Water Soluble Inhibitors, Volatile Inhibitors and Acid Inhibitors
* Typical Corrosion Inhibitors, Scavengers & Biocides for Oil & Gas Field
* Guidelines of Inhibitor and Biocide Applications and the Chemical Injection Equipment for Pipeline and Surface Facility
* Inhibitor and Biocide Batch Treatment Using Pigs, Chemical Dosage and the Pigging Operations
* Surfactant and Cleaners for Solving Fouling Problem in the Equipment and Systems
* Cationic & Mixed Charge Organic Inhibitors for Hydrocarbon and Oxygen Corrosion Inhibitors for Produced Water
* Testing and Evaluation of Inhibitor and Biocide Effectiveness
* Safety Precaution in Working with Inhibitors and Biocides

Internal Corrosion Control as a Key Factor to Pipeline Integrity Management
* Hazard Assessment and Risk Based Inspection for the Pipeline and Equipment Maintenance Program
* Pipeline Internal Damage Record and Wall Thickness Monitoring
* Pigging for Water and Deposit Removal from the Pipeline System
* Controlling of Flow Stability and Corrosion Rate to a Safe Level
* Estimating Present Pipeline Remaining Service Life
* Evaluation of Present Condition and Comparison with Initial Pipeline Design Baseline
* Evaluation and Controlling of Chemical Inhibitor and Biocide Injection by using Corrosion Rate Monitoring Data.
* Evaluation of Pipeline and Equipment Damage in accordance with Root Cause Failure Analysis
* Development of Specific Pipeline Integrity Management System by using Internal Corrosion Rate Monitoring Data

Course Leader: Hilman Ahmad
This specially designed course will be conducted by Hilman Ahmad & Associates, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Professional Industrial Oil & Gas Education Center, and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000. He has been delivering training course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

General Information
Facilities
* Quality training material (hardcopy and softcopy)
* Quality training kits included calculator, T-shirt or jacket, cap, ect.
* Convenient training facilities with four star quality
* Morning and afternoon coffee breaks and lunch for along the training
* Certificate of Completion
* Exclusive flash disk.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING PRACTICAL PUMPING METHODS FOR PETROLEUM PRODUCTION SYSTEM

TRAINING PRACTICAL PUMPING METHODS FOR PETROLEUM PRODUCTION SYSTEM

TRAINING PRACTICAL PUMPING METHODS FOR PETROLEUM PRODUCTION SYSTEM

Training Metode Pemompaan Untuk Produksi Migas

Training Sistem Produksi Alamiah

training metode pemompaan untuk produksi migas murah

SASARAN BELAJAR :
Setelah menyelesaikan kursus ini diharapkan peserta dapat :
* Memahami prinsip-prinsip dasar perhitungan reservoir minyak bumi yang berhubungan dengan penggunaan sucker-rod, electric submersible, hydraulic dan jet pump.
* Melakukan diagnosis sederhana dan memengerti pengelolaan data sumuran minyak yang diproduksi dengan sucker rod pumping, electric submersible, hydraulic dan jet pump.
* Membuat analisis sederhana terhadap data sumuran minyak, melakukan perhitungan-perhitungan kinerja sumuran sebagai hasil dari pemompaan dengan berbagai metoda sesuai dengan keadaan reservoirnya.
* Melakukan perhitungan-perhitungan kuantitatip sederhana dan melakukan optimisasi produksi untuk sumuran minyak yang diproduksi dengan sucker rod pumping, electric submersible, hydraulic dan jet pump sesuai dengan batasan operasinya.

PRE-REQUISITE :
Latar belakang  : Operator/Sr. Operator/ Jr.Engineer

MATERI KURSUS :
* SISTEM PRODUKSI LAPANGAN MINYAK BUMI

* Sistem Produksi Alamiah
* Sistem Produksi Dengan Pengangkatan Buatan

* AZAS POMPA

* Sistem Produksi Alamiah
* Sistem Produksi Dengan Pengangkatan Buatan
* Kerja Pompa Sentrifugal
* Hukum Kesebangunan
* Kecepatan Spesifik (Nomor Jenis) dan Klasifikasi
* Performansi
* Kavitasi
* Momen awal

* SPESIFIKASI POMPA

* Kapasitas Aliran
* Sifat-sifat Zat Cair
* Head
* Head Isap Positip Neto atau NPSH
* Penentuan Putaran dan Jenis Pompa
* Daya Poros dan Efiensi Pompa
* Koreksi Performansi untuk Zat Cair Kental
* Pemilihan Bahan
* Pemilihan Penggerak Mula

* KONSTRUKSI POMPA

* Klasifikasi Menurut Jenis Impeler
* Klasifikasi Menurut Bentuk Rumah
* KIasifikasi Menurut Jumlah Tingkat
* Klasifikasi Menurut Letak Poros
* KIasifikasi Menurut Belahan Rumah
* KIasifikasi Menurut Sisi Masuk Impeler
* Pompa jenis Tumpuan Sumbu
* Pompa Jenis Khusus
* Alat Pengimbang Gaya AksiaI

* OPERASI POMPA

* Kurva Head Kapasitas Pompa dan Sistem
* Operasi Paralel dan Operasi Seri
* Pengaturan Kapasitas
* Prosedur Menjalankan dan Menghentikan
* Benturan Air (Water Hammer)
* Surjing
* Fluktuasi Tekanan
* Operasi Otomatik

* SUCKER ROD PUMP

* Pendahuluan
* Pump Intake Curve
* Optimisasi Produksi
* Rancangan Sucker Rod Pump API RP11L
* Komponen Alat Utama
* Faktor-faktor yang mempengaruhi gerakan rod
* Perencanaan pompa
* Dynagraph & Dynamometer

* ELECTRIC SUBMERSIBLE PUMP

* Pendahuluan
* Dasar-dasar perhitungan ESP
* Konstruksi ESP
* Karakteristik pompa SRP
* Cara Memilih jenis pompa
* Aplikasi di Lapangan

* POMPA HIDRAULIK

* Alat-alat permukaan
* Jenis-jenis unit pompa
* Jenis-jenis unit pompa
* Ukuran pompa
* Langkah-langkah pada pemilihan pompa hidraulik

* POMPA JET

* Pendahuluan
* Persoalan gas
* Ukuran Nozzle dan throat
* Langkah-langkah pada perhitungan Jet pump
* Grafik Kelakuan pompa
* Menggunakan program mesin hitung
* Hasil lapangan

* PCV (PROGRESSIVE CAVITY PUMP)

* Pendahuluan
* Deskripsi Peralatan
* Elastomer
* Perancangan

INSTRUKTUR :
DR. IR. SUDJATI RACHMAT, DEA was graduated from Petroleum Engineering Department of ITB in 1979 and hold Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France. The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Fluid Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA,

CO-INSTRUKTUR:
1.     Ir. Amega Yasutra, MT

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING PRESSURE VESSEL AND PIPING DESIGN

TRAINING PRESSURE VESSEL AND PIPING DESIGN

TRAINING PRESSURE VESSEL AND PIPING DESIGN

Training Pengenalan Pressure Vesel

Training Desain Perpipaan

training pengenalan pressure vesel murah

DESCRIPTION

In order to address the safety concerns associated with pressurized equipment and piping, these are required to be designed, fabricated and operated according to specified codes and standards. The commonly accepted codes are the ASME Sec. VIII Div. 1 for design of pressure vessels and ANSI B31.1 for design of piping. It takes a new engineer considerable time to understand that there is much more to pressure vessel design than calculation of hoop stress. The present course is designed to bridge the gap between the theoretical aspects of pressure vessel design and its industrial application. The faculty of this course would share their considerable experience to address the practical issues associated with pressure vessel design.

WHO SHOULD ATTEND

The course is aimed at engineers from Engineering and Manufacturing organizations who are involved in design and fabrication of pressure vessel and piping. It is anticipated that participants hold an engineering degree or have been involved for a good number of years in the design of vessels and piping. This course will be particularly appropriate for new engineers needing initial familiarity with application of ASME Code to the design and construction of pressure vessel and piping. It is also useful for engineers who have some experience of pressure vessel equipment and who wish to broaden their understanding of the behaviour of pressurized equipment.

PRESSURE VESSEL & PIPING DESIGN SUMMARY OUTLINE

1. Introduction to Pressure Vessel Design Codes
2. Design Basis and Design Criteria
3. Design for Internal pressure
4. Design for External Pressure
5. Design of Nozzles
6. Flange design
7. Design of Vessel supports
8. Design of Tubesheets
9. Fabrication
10. Examination
11. Testing
12. Computer codes for pressure vessel design
13. Case studies on failure of pressure vessels
14. Materials of construction for pressure vessels
15. Design of piping as per ANSI B31.1
16. Pressure, thermal and dynamic loads
17. System layout
18. Pipe supports and restraints
19. Piping flexibility, Flexibility factor and stress intensification factor
20. Computer codes for Piping analysis

COURSE METHOD
* Presentation
* Discuss
* Case Study
* Evaluation
* Simulation

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING PROCESS OPERATION IN OIL AND GAS INDUSTRIES

TRAINING PROCESS OPERATION IN OIL AND GAS INDUSTRIES

TRAINING PROCESS OPERATION IN OIL AND GAS INDUSTRIES

Training Proses Operasi Di Industri Minyak Dan Gas

Training Hydrocarbon Properties & Characteristics

training proses operasi di industri minyak dan gas murah

DESKRIPSI

Pelatihan  ini  bertujuan  untuk  memberikan pengetahuan dan pemahaman
tentang  operasi  dari plant pemrosesan minyak dan gas. Pelatihan akan
diawali  dengan  pembahasan  mengenai  sifat  dan  karakteristik  dari
hydrocarbon   sebagai   komponen   utama   penyusun  minyak  dan  gas.
Selanjutnya  akan dilakukan overview terhadap proses atau operasi yang
digunakan dalam pengolahan minyak dan gas. Berdasarkan pengetahuan dan
pemahaman  tentang  sifat dan karakteristik minyak/gas dan proses atau
operasi  yang digunakan dalam pengolahan gas tersebut, maka pembahasan
mengenai  proses  operasi  pemrosesan  minyak dan gas dapat dilakukan.
Dalam  pelatihan  ini,  selain metode pemaparan, akan banyak dilakukan
diskusi  dan  latihan-latihan perhitungan, sehingga peserta akan lebih
banyak aktif, dan peserta diharapkan untuk aktif berlatih.

TUJUAN

Dengan mengikuti pelatihan ini, peserta diharapkan:
Peserta  akan  mendapatkan  tambahan pengetahuan dan pemahaman tentang
proses atau operasi dalam pengolahan minyak dan gas.

MATERI

Introduction to Oil and Gas Processing Operations
Hydrocarbon Properties & Characteristics
molecular weight,
heat of combustion,
heat of vaporization, etc
Oil and Gas Specification
LNG,
LPG,
condensate,
gasoline, kerosene, etc
Crude Oil Separation
oil-gas-water separation,
KO drum, etc
Oil and Gas Conditioning
sweetening,
dehydration
Refrigeration
Refrigerant cycle,
refrigeration and throttling,
work fluids,
phase diagram,
refrigerant selection
Oil & Gas Fractionation/Distillation
vapor-liquid equilibrium,
vapor pressure,
partial pressure concept,
plate column
Heat Exchanger
heat transfer,
double pipe,
shell & tube,
plate heat exchanger,
energy calculation and audit in heat exchanger
Discussion and Case Study.

METODE

Kegiatan  pelatihan  dirancang  agar  peserta  dapat  memahami  secara
komprehensif  materi yang disampaikan, sehingga dapat dimplementasikan
secara  aplikatif  dalam  dunia  kerja.  Adapun  metode yang digunakan
adalah:
Presentation
Discuss
Case Study
Evaluation

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING PROCESS PIPING & PIPELINE SYSTEM

TRAINING PROCESS PIPING & PIPELINE SYSTEM

TRAINING PROCESS PIPING & PIPELINE SYSTEM

Training Pipa Proses & Sistem Pipa

Training Safety Equipment / Pressure Release Device

training pipa proses & sistem pipa murah

DESKRIPSI & TUJUAN TRAINING :

Pelatihan process piping & pipeline system ini dibuat untuk menghasilkan skill dan pemahaman komprehensif tentang proses perpipaan dan sistem jaringan pipa. Setelah mengikuti pelatihan ini, peserta diharapkan dapat mengembangkan pengetahuan dan kemampuan yang diperlukan didalam pengendalian perpipaan, perlindungan pada korosi sistem jaringan pipa, mengembangkan kemampuan didalam memahami dan mengevaluasi hasil dari chemical injection dan peralatan pressure release.

CAKUPAN MATERI TRAINING PROCESS PIPING & PIPELINE:

1. Specification and standard of process piping & pipeline system
2. Piping, pipeline operation & basic technical calculation
3. Erotion and corrosion problem in piping and pipeline system
4. Technical aspect of chemical injection into process and tranportation pipeline system
5. Access fitting assembly for chemical injection and fluid sampling
6. Safety equipment / pressure release device
7. Introduction of stress analysis
8. Latihan, Diskusi dan tanya jawab

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI? :

Beberapa kategori para profesional yang dapat mengikuti kursus :

D3 atau SLTA yang berpengalaman kerja minimal 3 tahun atau setara sebagai teknisi, operator, foreman supervisor produksi dan supervisor pipeline.

INSTRUKTUR

Training PROCESS PIPING & PIPELINE SYSTEM yang diselenggarakan, akan dilatih oleh instruktur yang berpengalaman dalam bidang PROCESS PIPING & PIPELINE SYSTEM :

Instruktur yang mengajar pelatihan PROCESS PIPING & PIPELINE SYSTEM ini adalah instruktur yang berkompeten di bidang PROCESS PIPING & PIPELINE SYSTEM ini baik dari kalangan akademisi maupun praktisi.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

Tanyakan pada kami ?

Kami di sini untuk membantu Anda! Jangan ragu untuk menanyakan apapun kepada kami. Klik di bawah untuk memulai obrolan.

Marketing

Yulianti

Online

Yulianti

Hai, tanyakan pada kami ? 00.00