TRAINING ENHANCED OIL RECOVERY AND WATERFLOOD

TRAINING ENHANCED OIL RECOVERY AND WATERFLOOD

TRAINING ENHANCED OIL RECOVERY AND WATERFLOOD

Training Enhanced Oil Recovery

Training Enhanced Waterflood

TRAINING ENHANCED OIL RECOVERY AND WATERFLOOD

DESKRIPSI ENHANCED OIL RECOVERY AND WATERFLOOD

EOR adalah metode perolehan minyak tahap lanjut dengan cara menambahkan energi berupa dari material atau fluida khusus yang tidak terdapat dalam reservoir minyak.

Oil recovery operations traditionally have been subdivided into three stages: primary, secondary and tertiary. These stages described the production from a reservoir in achronological sense. Primary production resulted from the displacement energy naturally existing in reservoir. Secondary recovery usually implemented after primary production declined, the term secondary recovery is now almost synonymous with waterflooding.  Tertiary recovery was that obtained after waterflooding (or whatever secondary process used) it’s used miscible gases, chemicals and/or thermal energy to displace additional oil.  When the waterflooding stage might be reasonably be bypassed the term tertiary recovery fell into disfavor in petroleum engineering term and the designation of enhanced oil recovery (EOR) become accepted to replace the term of secondary and tertiary recovery.
In describing the different EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline and finally Thermal Recovery Processes, it will be focused on the fundamental concepts of each processes and it will also present methods of predicting oil recovery when the processes are applied to oil reservoir. Many methods are available to calculate displacement performance, ranging from simple models based on volumetric sweep to sophisticated method. Thus, with the proper understanding of all enhanced oil recovery processes will reduce the entire cost of the plant and production operation of EOR system. This four-day training will provide a comprehensive knowledge and understanding of different EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes with various fields example.

Perlunya memilih provider training NISBI INDONESIA yang tepat agar pengetahuan kita mengenai  ENHANCED OIL RECOVERY AND WATERFLOOD tidak salah

TUJUAN TRAINING ENHANCED OIL RECOVERY AND WATERFLOOD

  •  Refresh the knowledge of the participants on reservoir engineering and enhanced oil recovery (EOR) processes.
  •  Understand the fundamental concepts of each EOR process and ability to calculate and to predict the EOR performance.
  •  Learn the simple EOR models based on volumetric sweep model to sophisticated method of calculation.
  •  Enhance the knowledge on EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes with various fields example.
  •  Gain additional knowledge on EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes. Knowledge sharing among the and instructor.

Dengan mengikuti pelatihan NISBI INDONESIA Peserta dapat berbagi pengetahuan / sharing knowledge mengenai  ENHANCED OIL RECOVERY AND WATERFLOOD dengan peserta dari perusahaan lain yang bergerak di bidang  ENHANCED OIL RECOVERY AND WATERFLOOD

MATERI TRAINING ENHANCED OIL RECOVERY AND WATERFLOOD

  1. Day 1
    1. Introduction to EOR Processes

      •  Definition of EOR
      •  TargetOil Resources for EOR Processes
      •  Idealized Characteristics of an EOR Processes
      •  Potential of Different Processes
      •  Screening Criteria for Process Applicability
    2.  Microscopic Displacement of Fluids in a Reservoir
      •  Capillary Forces and Viscous Forces
      •  PhaseTrapping
      •  Mobilization of Trapped Phases-Alteration of Viscous/Capillary Force Ratio
    3.  Displacement in Linear System
      •  Waterflood Performance – Frontal Advanced Equation
      •  Viscous Waterflood in a Linear System
      •  Chemical Flooding in Linear System
      •  Application of Chemical Flooding Model
      •  Displacement of Slugs
      •  Dispersion During Miscible Displacement
      •  Viscous Fingering – Instability in
      •  Displacement Fronts
  2. Day 2
    1.  Macroscopic Displacement of Fluids in a Reservoir
      •  Volumetric Displacement Efficiency and Material Balance
        •  Definition and Discussion of Mobility Ratio
        •  AreaDisplacement Efficiency
        •  Vertical Displacement Efficiency
        •  Volumetric Displacement Efficiency
    2.  Mobility-Control Processes
      •  Process Description
        •  Physical and Chemical Characteristics of Polymer
        •  FlowPolymer Through Porous Media
        •  In-SituPermeability Modification
        •  Mobility Control to maintain Chemical Slug Integrity
        •  Foamas EOR Agent
        •  WaterAlternating Gas (WAG) Process
  3. Day 3
    1.  Miscible Displacement Processes
      •  General Description of Miscible Displacement
        •  Principles of Phase Behavior in Miscible Displacement
        •  First Contact Miscibility (FCM) and Multiple Contact Miscibility (MCM) Processes
        •  Measurement and Prediction of Minimum Miscible Pressure (MMP) or Minimum Miscible Gas Enrichment (MME) in Multiple Contact Process
        •  FluidProperties in Miscible Displacement
        •  Miscible Displacement Modeling
    2.  Chemical Flooding
      •  Description of Micellar/Polymer Process
      •  Surfactants
      •  Phase Behavior of Microemultion and Inter Facial Tension(IFT)
      •  Variables Affecting Phase Behavior & IFT
      •  Viscosity and Density of Microemultion
      •  Displacement Mechanism
      •  Modeling, design Procedure and Criteria of?Chemical Flood Displacement
      •  Alkaline Flooding
  4. Day 4
    1.    Thermal Recovery Processes
      •  HeatLosses During Steam Injection
      •  CyclicSteam Stimulation
      • Reservoir Heating by Steam Injection
      •  Estimating of Oil Recovery From Steam Drive
      •  In-Situ Combustion
      •  Comparison of Steam and In-Situ Combustion
    2.  Discussion on successful & unsuccessful EOR projects

PESERTA TRAINING ENHANCED OIL RECOVERY AND WATERFLOOD

  •  FreshPetroleum, Reservoir, Production and Facility/Process Engineer
  •  Geoscientist
  •  AssetManagement Team members and Business Development Manager
  •  Production Operators, Technician, Maintenance and Operation Personnel who is responsible for the EOR processes design and implementation
  •  Experienced professional who wants to r e f r e s h o r b r o a d e n t h e i r understandingof EOR Processes & technology
  •  Other professionals who want a better understanding of the subject

METODE TRAINING ENHANCED OIL RECOVERY AND WATERFLOOD

Metode penyelenggaraan baik secara training online atau training zoom atau training daring maupun training offline atau training tatap muka :

  1. Presentasi
  2. Diskusi antar peserta
  3. Studi kasus
  4. Simulasi
  5. Evaluasi
  6. Konsultasi dengan instruktur

TRAINER/ INSTRUKTUR

Instruktur yang berkompeten di bidang ENHANCED OIL RECOVERY AND WATERFLOOD
Tim Instruktur NISBI INDONESIA
Kegiatan training dan konsultansi dikelola oleh para tenaga ahli dan instruktur yang berpengalaman dan berkompeten di bidangnya. Ini akan menjadi “kunci” bagi suksesnya aktivitas training dan konsultansi yang dijalankan.Juga menjadi kunci bagi perkembangan perusahaan anda di masa depan.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia  2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024

Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024

Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024

Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024

Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024

Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024

Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,