TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY

TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY

TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY

Training Kontrol Korosi Internal Dan Eksternal Dan Pemantauan Untuk Fasilitas Saluran Pipa Dan Permukaan

Training Metode Dan Bahan Digunakan Untuk Mengontrol Korosi Dari Larutan Amina Yang Kaya

TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY

DESKRIPSI INTERNAL AND EXTERNAL CORRORION CONTROL

External corrosion is highly dependent on the natural atmospheric conditions prevailing at the geographic location. Humid seacoast locations are more corrosive than a dry inland location.

This course focuses on corrosion – from either internal or external source – and its potential problem, and the protection methods to stop or control them. Review on corrosion and technique by which it can be identified, monitored and controlled will be given in detail. Active participation is encouraged through case studies and examples especially on the use of painting and coatings, transformer-rectifier of impressed current, magnesium, zinc and alum sacrificial anodes for external protection, and the injection of corrosion inhibitors and biocides for internal corrosion control.

Perlunya memilih provider training NISBI INDONESIA yang tepat agar pengetahuan kita mengenai INTERNAL AND EXTERNAL CORRORION CONTROL tidak salah

TUJUAN TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL

Dengan mengikuti pelatihan NISBI INDONESIA Peserta dapat berbagi pengetahuan / sharing knowledge mengenai INTERNAL AND EXTERNAL CORRORION CONTROL dengan peserta dari perusahaan lain yang bergerak di bidang INTERNAL AND EXTERNAL CORRORION CONTROL

MATERI TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL

  1. Review of oil & gas surface production facility and operations.
  2. Review of metallic materials used in surface production facility and pipelines and the corrosion problem usually happen.
  3. Case studies and examples of oil & gas material failure caused by corrosion from internal and external source.
  4. Uniform, galvanic and localized corrosion failures.
  5. Internal corrosion of pipeline, vessel and processing equipment caused by sour component, H2S, CO2, organic acid, brine, and the SRB (sulfate reducing bacteria).
  6. External corrosion of underground, underwater and under-seawater pipeline and structure caused by impurities in soil and water environment.
  7. External corrosion of topside structure caused by marine atmosphere.
  8. Basic electrochemistry of corrosion process, Ohm’s law and the corrosion rate.
  9. Corrosion control and prevention with painting & coatings and the cathodic protection.
  10. Measurement of corrosion potential and corrosion current.
  11. Protection with sacrificial anode and impressed current.
  12. Understanding NACE Standard RP-01-69 to stop external corrosion attack.
  13. Requirement, design and criteria of cathodic protection.
  14. Sacrificial anode specification, installation and construction.
  15. Testing, monitoring, and inspection of cathodic protection.
  16.  Inspection and maintenance of transformer-rectifier and sacrificial anode.
  17. Field test, measurement techniques and instrument.
  18. Data recording and evaluation of cathodic protection system.
  19.  Case studies of corrosion control and prevention with cathodic protection.
  20. Internal corrosion problem in the pipeline and surface facility.
  21. Oil/gas/water fluid properties and the corrosion tendency.
  22. Deterioration by H2S, CO2, and acidic corrosive components.
  23. Pipeline leakage and rupture by microbial induced corrosion.
  24. Corrosion caused by SRB and the pitting mechanism.
  25. Corrosion caused by oxygen penetration.
  26. Examples and case studies of equipment corrosion damage and pipeline leakage.
  27. Understanding NACE Standard RP-0775 for internal corrosion control and monitoring.
  28. Practical internal corrosion monitoring methods.
  29. Access fittings, corrosion coupon and corrosion probes.
  30. Practical internal corrosion control and prevention methods.
  31. Internal corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals.
  32. Dosage and injection methods of corrosion inhibitors.
  33. SRB control with biocides and the selection of suitable and low risk biocide formula.
  34. Dosage and injection methods of biocides.
  35.  Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger chemicals.
  36. Dosage and injection methods of oxygen scavenger.
  37. Safety in the use of chemicals for internal corrosion prevention.
  38. Review of gas dehydration process and operations.
  39. Internal corrosion problem in glycol contactor (dehydration) unit.
  40.  Method and materials use to control the corrosiveness of rich glycol solution.
  41. Review of amine sweetening process and operations.
  42. Internal corrosion problem in amine sweetening unit.
  43. Method and materials use to control the corrosiveness of rich amine solution.
  44. Examples and case studies of internal corrosion control

PESERTA TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL

  1. Anyone who needs to recognize corrosion and understand its devastating potential, especially as it relates to his or her area of responsibility, in oil and gas surface production facility and pipelines.
  2. Anyone involved in combating and controlling corrosion from internal and external source.
  3. Technicians and field operators and engineers of any discipline.
  4. Onshore / offshore facility and pipeline cathodic protection inspectors.
  5. Onshore / offshore structure painting and coating applicators and inspectors.
  6. Amine sweetening, glycol dehydration and gas processing plant operators.
  7.  Beginners who interested in.

METODE TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL

Metode penyelenggaraan baik secara training online atau training zoom atau training daring maupun training offline atau training tatap muka :

  1. Presentasi
  2. Diskusi antar peserta
  3. Studi kasus
  4. Simulasi
  5. Evaluasi
  6. Konsultasi dengan instruktur

TRAINER/ INSTRUKTUR

Instruktur yang berkompeten di bidang INTERNAL AND EXTERNAL CORRORION CONTROL
Tim Instruktur NISBI INDONESIA
Kegiatan training dan konsultansi dikelola oleh para tenaga ahli dan instruktur yang berpengalaman dan berkompeten di bidangnya. Ini akan menjadi “kunci” bagi suksesnya aktivitas training dan konsultansi yang dijalankan.Juga menjadi kunci bagi perkembangan perusahaan anda di masa depan.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,,,

Post Views: 132