TRAINING PIPELINE DESIGN PRACTICE IN OIL & GAS

TRAINING PIPELINE DESIGN PRACTICE IN OIL & GAS

TRAINING PIPELINE DESIGN PRACTICE IN OIL & GAS

Training Praktek Desain Saluran Pipa Di Oil & Gas

Training Fundamental Design Of Piping

training praktek desain saluran pipa di oil & gas murah

OBJECTIVES

This course is designed to improve and provide a comprehensive understanding of piping & pipeline maintenance and technology. Pipeline technical calculation commonly practiced in oil & gas or industrial fluid production and transportation operation will also be discussed and learned. Therefore, after attending this 5-day course participants will have:
* Better understand and get improvement on the description, classification, requirement and specification of steel pipeline in oil and gas, petrochemical, etc.
* Improvement on ability to interpret and evaluate piping and pipeline performance data.
* Skill to identify and solve problems in oil and gas transportation system.
* Better knowledge of maintenance integrity properly in piping and pipeline

COURSE OUTLINE

Nature of Industrial Fluid, Oil and Gas Field Fluid
* Physical and thermodynamic properties of oil and gas-field fluid
* Pressure-volume-temperature relationship
* Energy balance of fluid flowing in the pipeline

Specification and Standard of Oil and Gas or Industrial Pipeline
* Technical requirements of steel materials for oil and gas pipeline
* Specification, standard and recommended practice
* Pressure rating of pipeline, valve and fittings

Fundamental Design of Piping
* Flow Rate Calculation
* Pressure Drop/Pressure Loss/Head Loss Calculation in Pipe and Joint
* Flow Rate and Pressure Drop Calculation on Branch Pipes (Hardy Cross)
* Forces Calculation on Piping , Pipe Strength, Allowable Stress, Design Factor
* Basic Analysis of Piping System Flexibility
* Piping and Pipeline Insulation and Corrosion Protection
* Problem and Calculation Exercise

Design of Pipeline Supports
* Standard Component Supports
* Pipe Support Service
* Pipe Support Classifications
* Structural Shapes and Pipe Support Group

Pipeline Operation and Basic Technical Calculation
* Formulas for fluid transportation operation
* How to calculate head loss and pressure drop
* Pump and compressor installation in the pipeline

Erosion and Corrosion Problems in the Pipeline
* Erosion and Corrosion in sour oil and gas production
* How to calculate the maximum allowable working pressure
* How to estimate the remaining service life of the pipeline

Pipeline Maintenance, Control and Monitoring
* Pigging and cleaning of the pipeline
* Criteria, standards and recommended practices for internal pipeline corrosion control
* Installation of access fitting and fluid sampling assembly

Introduction to Risk-Based Inspection concept

RECOMMENDED PARTICIPANTS

Technical Personnel of Oil and Gas or Industrial Company Who Involves in or Concern With Handling Operation and Maintenance of Up-Stream Oil and Gas or Industrial Pipeline and Those Who Responsible in Oil and Gas or Industrial Fluid Transportation through Pipeline System.

Instructor
Prof. DR. Ir. IGN. Wiratmaja Puja

Prof. DR. Ir. IGN. Wiratmaja Puja has 16 years continuous mechnanical engineering experience in failure and stress analysis, mining machinery and design as well as mechanical drawing and has been a consulting engineering expert in machinery and equipment maintenance for PT. Tambang Batubara Tanjung Enim, KONDUR Petroleum and PT. Kereta Api Indonesia. He also has served as an in-company training instructor for several major oil and gas companies such as PT. Badak LNG, PT. Freeport Indonesia, VICO and PT. Timah Tbk.

Mr. Wiratmaja has authored numerous publications and presentations related to mechanical engineering and mining machinery. He holds a M.Sc. and Ph.D. degree in Mechanical Engineering from the University of Kentucky, USA.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia  2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024

Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024

Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024

Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024

Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024

Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024

Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

Post Views: 72