TRAINING LIFE CYCLE COSTING (LCC)

TRAINING LIFE CYCLE COSTING (LCC)

TRAINING LIFE CYCLE COSTING (LCC)

Training Pengenalan Life Cycle Costing (Lcc)

Training Konsep Life Cycle Costing

TRAINING LIFE CYCLE COSTING (LCC)

DESKRIPSI LIFE CYCLE COSTING (LCC)

Life Cycle Cost (LCC) adalah suatu konsep pemodelan perhitungan biaya dari tahap permulaan sampai pembongkaran suatu aset dari sebuah proyek sebagai alat untuk mengambil keputusan atas sebuah studi analisis dan perhitungan dari total biaya yang ada selama siklus hidupnya

Life Cycle Costing (LCC) also called Whole Life Costing is an economic assessment of an item, system or facility, considering all the significant costs of ownership over its economic life, expressed in terms of equivalent dollars/euros. LCC is important because the visible costs of any acquisition/purchase represent only a small proportion of the total cost of ownership. Another important reason for LCC is due to a strong relationship between operation and maintenance costs and the functionality and reliability of the item. Therefore, the application of LCC requires a sufficient engineering knowledge.

LCC itself is a structured approach that addresses all elements of ownership costs in relation with the functionality and reliability performance of the item. The results of an LCC analysis, one of them is a cost profile of the product or service over its anticipated life-span, can be used to assist management in the decision-making process where some options exist. Major area of LCC applications are in hardware acquisition process, modification of hardware and software, and in reduction of operation and maintenance costs.

LCC consists of Life Cycle Cost model development and the Life Cycle Cost model application for each option. The primary activities of the Life Cycle Cost model development are the Cost Breakdown Structure (CBS) development and the selection of cost component estimation method. The output of LCC is a Life Cycle Cost estimate, including its distribution on a time scale, cost drivers, sensitivity of the estimate to particular parameters and the risk due to uncertainty of design parameters.

Perlunya memilih provider training NISBI INDONESIA yang tepat agar pengetahuan kita mengenai  LIFE CYCLE COSTING (LCC) tidak salah

TUJUAN TRAINING LIFE CYCLE COSTING (LCC)

  1. To improve costs awareness. Application of LCC will improve awareness of the management and engineers on the factors that drive cost and the resources required by the item, so that cost reduction program is possible.
  2. Whole life costs evaluation. LCC allow evaluation of competing options on the basis of whole life costs.
  3. Trade-off performance against cost. When assessing options, cost is not the only factor to be considered. There are other factors such as the compliance to the specified performances and the levels of service to be provided.
  4. Maximize revenue. By applying LCC, the operation and maintenance costs are reduced without sacrifying the performance of the production equipment through analysis of the performance parameters and cost drivers.
  5. Specific for engineers, this course will describe the relationship between the functional and reliability performances and costs. This makes possible to identify specifications which resulting in high Life Cycle Cost.
  6. Understand the procedure to implement LCC including the development of Life Cycle Cost model for various applications.
  7. Understand the theoretical background of time value of money and risk analysis as well as their impact on decision making process.
Dengan mengikuti pelatihan NISBI INDONESIA Peserta dapat berbagi pengetahuan / sharing knowledge mengenai  LIFE CYCLE COSTING (LCC) dengan peserta dari perusahaan lain yang bergerak di bidang  LIFE CYCLE COSTING (LCC)

MATERI TRAINING LIFE CYCLE COSTING (LCC)

  1. Why LCC?
  2. LCC and system effectiveness.
  3. Various economic evaluation.
  4. LCC procedure.
  5. Cost Breakdown Structure (CBS)
  6. Cost Estimation Methods.
  7. Time value of money
  8. Risk analysis
  9. Cost drivers identification
  10. Area of LCC applications.
  11. LCC model development.
  12. LCC for hardware acquisition.
  13. LCC for hardware modification.
  14. LCC for maintenance optimization.
  15. Interactive discussion

PESERTA TRAINING LIFE CYCLE COSTING (LCC)

  1. Engineers (Engineering, Reliability, Maintenance)
  2. Purchasing engineer/manager
  3. Project Engineer
  4. Process & Manufacturing Engineer
  5. Maintenance Manager/ Supervisor
  6. Other professional who wants to have a better understanding and take advantage from the course.

METODE TRAINING LIFE CYCLE COSTING (LCC)

Metode penyelenggaraan baik secara training online atau training zoom atau training daring maupun training offline atau training tatap muka :
  1. Presentasi
  2. Diskusi antar peserta
  3. Studi kasus
  4. Simulasi
  5. Evaluasi
  6. Konsultasi dengan instruktur

TRAINER/ INSTRUKTUR

Instruktur yang berkompeten di bidang LIFE CYCLE COSTING (LCC)
Tim Instruktur NISBI INDONESIA
Kegiatan training dan konsultansi dikelola oleh para tenaga ahli dan instruktur yang berpengalaman dan berkompeten di bidangnya. Ini akan menjadi “kunci” bagi suksesnya aktivitas training dan konsultansi yang dijalankan.Juga menjadi kunci bagi perkembangan perusahaan anda di masa depan.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia 2025

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,