TRAINING OIL FILM BEARING (JOURNAL DAN THRUST BEARING – HYDRODYNAMIC BEARINGS)

TRAINING OIL FILM BEARING (JOURNAL DAN THRUST BEARING – HYDRODYNAMIC BEARINGS)

TRAINING OIL FILM BEARING (JOURNAL DAN THRUST BEARING – HYDRODYNAMIC BEARINGS)

Training Oil Film Bearing (Jurnal Dan Thrust Bearing – Bantalan Hidrodinamik)

Training Jenis Dan Penyebab Kegagalan Journal Dan Thrust Bearings Serta Penanganannya

training oil film bearing (jurnal dan thrust bearing - bantalan hidrodinamik) murah

CAKUPAN MATERI TRAINING :
1. Introduksi dan pokok-pokok Dasar Hidrodinamika
2. Konstruksi dan komponen Journal dan Thrust Bearings.
3. Kapasitas dukung (Load Capacity) Bearing
4. Parameter pembangkitan tekanan pd Journal dan Thrust Bearings.
5. Clearance dan pengaruhnya pd prestasi bearing
6. Ketebalan film minimum
7. Keterkaitan jenis Bore Journal Bearing (plain, dammed groove, lemon bore, three lobe, offset halves, tilting pad, etc) terhadap kapasitas dukung dan kecepatan putar
8. Material Bearing dan angka Sommerfeld
9. Fenomena whirl, half frequency whirl, whip dan jam/stuck
10. Karakteristik prestasi Journal dan Thrust Bearings.
11. Gesekan, Rugi Power dan Peningkatan Temperatur.
12. Pemilihan dan kemerosotan lubrikan
13. Jenis dan penyebab kegagalan Journal dan Thrust Bearings serta penanganannya
14. Diskusi Interaktif

TRAINING INSTRUCTOR
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training  untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company,
Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC  SES LTD, PLTGU  BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain.  Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENTAL IN THE OIL & GAS INDUSTRY

TRAINING OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENTAL IN THE OIL & GAS INDUSTRY

TRAINING OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENTAL IN THE OIL & GAS INDUSTRY

Training Safety In The Oil And Gas Industry

Training Keselamatan Pada Industri Migas

training safety in the oil and gas industry murah

INTRODUCTION :

Health, Safety and Environmental (HSE) practices is accorded high priority in the oil and gas industry because of the inherently hazardous nature of operations. Ensuring that you are oil and gas’ HSE literate is mandatory if you seriously desire quick and unhindered access to skillfull employment in oil & gas sector companies/ projects. Following wide spread  interest by many graduates to acquire knowledge and certification in oilfield HSE management,  this course is offering opportunities for graduates of all disciplines to acquire HSE literacy and be   equipped with working knowledge of HSE management principles/ practices as required in the oil & gas sector and other industiral sectors

BENEFITS YOU WILL RECEIVE :
1. With this training you have a distinct and clear advantage over NON-HSE LITERATE employees competing for oil field  jobs.
2. Those who evidence their attendance with our HSE CERTIFICATE OF TRAINING shall be immediately included into our cv data base and their cv strategically forwarded and endorsed to key recruitment firms /human resource personnel in the oil & gas sector for short listing and possible contract term job placement within their disciplines-as they become available.
3. You will be entered opportunity to receive further training which will qualify you to work as safety supervisor, hse supervisor, safety officer, hse officer, etc in any company

TRAINING MATERIAL OUTLINE  OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENTAL IN THE OIL & GAS INDUSTRY :

1. Overview : oil and gas industry , the existing and future trends
2. Introduction to occupational health , safety and environment management concept
3. Introduction to mandatory oil and gas’ HSE practices
4. Mechanisms of workplace accident prevention and management
5. Principles of hazardous and ‘safety’ in industrial establishment
6. Environmental management appreciation
7. Fundamentals of occupational health
8. Lesson Learn from reputable oil and gas companies both in Indonesia and overseas

INSTRUCTOR :

Ir. Wahyu Priatna Affandi, M.Si,

Ir. Wahyu Priatna Affandi, N.Si,

He is a Petroleum Engineer from ITB, so understand and familiar with the ins and outs of business activities on natural resources, especially in oil, gas and geothermal, mining and general business supporters. He also as a Master in the ‘Environment Management’ from Unpad / Twente Enchede of Netherland so understand and familiar with the formal aspects of business activity ‘decent environment’

Having experiences  for more than  25 years in the company of foreign oil and gas onshore / offshore (Vico Indonesia, Lasmo Indonesia / Eni Indonesia) and national oil and gas (Medco E & P, JOB-PMTs, etc.) as well as having roles in various fields of work sectors of oil and gas, from reservoir  engineering , production, drilling / workover, tanker  coordination, community relations, to the field of HSEQ-Health, Safety, Environmental & Quality; contractor supporting oil and gas and other industrial sectors (general mining, petrochemicals).

He often sharing of knowledge and information through formulation based product training work experience, ie: Environmentally Safe Drilling Practices, Environmental Control in Petroleum Engineering, Waste Management in Oil, Gas & Geothermal Industry, Water Management Field: treatment and safe disposal, HSE Campaign for better communication with stakeholders, Rain Water Harvesting, HSEQ Integrated Management, Environmental Legislation – anticipating conflicts, Emergency HSEQ Preparadness-based, and other related aspects of HSE.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,,

TRAINING OIL & GAS OPERATION

TRAINING OIL & GAS OPERATION

TRAINING OIL & GAS OPERATION

Training Operasi Minyak & Gas

Training Pengendalian Eksploitasi Minyak

training operasi minyak & gas murah

Pembicara / Fasilitator
Ir. M Mansyur
Mohammad Mansur, has 11 years experience as consultant and training instructor in various oil and gas companies area. Mansur has Sarjana Degree of Petroleum Engineering ITB – Bandung. He spent 30 years at PT. Stanvac Indonesia (PTSI) as Production Engineering Supervisor, and 3 years as VP/Sr. Manager of Technical Division at PT. Ustraindo Petrogas and 10 years as a Lecturer of Petroleum Engineering Department at Trisakti University. Some clients that have been served by Mansur are Expan, Vico, Kondur, Total Fina-Elf, Premier Oil Natuna Sea, Caltex-Indonesia, Pertamina, Kodeco, Conocco Phillips, Unocal, Medco EPI, etc. His experiences in consulting about Comprehensive IDP program for staff & Managerial positions and TNSA for Vico, Training Need Survey (Skill gap Analysis) for Premier Oil, Developing Training Matrix for Perusahaan Gas Negara (PGN), developing training matrix for PT. A.S.E.I, Job description & Organization Structuring for PT. Dos Ni Roha, Job Description & Evaluation for Staff and
Managerial Positions for EMP Kangean Ltd., EMP Kalila Ltd. and Geo Energy Ltd. From 2002 – now Mansur as Class mentor for Graduate Engineering Trainee (GET) programs, for PT. Medco E&P Indonesia in Jakarta and oil & gas fields.

COURSE CONTENT
The Origins of Oil & Gas
• The formation of petroleum
• Different kinds of reservoirs
• Reservoir characteristics

World Energy Demand & Supply
• Petroleum reserves
• Classification of reserves

Products from Petroleum
• Refining
• Petrochemicals
• Hydrocarbon pricing

Control of Petroleum Exploitation
• Ownership of reserves
• The control and award of petroleum concessions
• Unitisation
• Production Sharing Agreements

The Reservoir Life Cycle
• Exploration
• Appraisal
• Development
• Production
• Abandonment

Petroleum Economics
• How exploration, appraisal and development decisions are made

Drilling
• Drilling a well
• Drilling time depth/cost curve
• Drilling equipment
• The mud system
• Casing and tubing
• Cementing
• Directional drilling
• Side-tracking
• Dual completions
• Multilateral and horizontal wells

Production
• Reservoir drive mechanisms
• Artificial lift systems
• Well treatment and work over – fracturing, sand control, acidizing
• Surface treatment – separation, compression
• Storage and transportation

Maintenance Activities
• Different kinds of maintenance – reliability, condition based, planned, breakdown

Logistics
• Materials management and warehousing
• Air and marine transportation

Crude Storage
• On Shore & Off Shore

Finance

Support Function

Wajib diikuti oleh
1. Finance personnel
2. Human resource professionals
3. Information systems specialists
4. Secretaries, administrative and technical support staff,
5. New Hire Engineer & Managers,
6. HR personnel,
7. Procurement / Logistic personnel,
8. Staff and Senior staff at all business functions

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING OIL & GAS SURFACE FACILITIES

TRAINING OIL & GAS SURFACE FACILITIES

TRAINING OIL & GAS SURFACE FACILITIES

Training Fasilitas Permukaan Minyak & Gas

Training Konsep Dasar Penanganan Minyak Dan Gas Dengan Proses Permukaan Dan Fasilitas Operasi

training fasilitas permukaan minyak & gas murah

Description
After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
* Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.
* Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
* Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system

Course Content
1. Introduction to Oil and Gas Production Operation
2. Oil Surface Production Facilities
+ Well Equipments
+ Pigging System
+ Separator
+ Gas Scrubber
+ Gas Dehydarator
+ Pumps : Centrifugal, Reciprocating, Diaphragm
3. Gas Surface Processing Facilities
+ Gas Sweetening
+ Heat Exchanger
+ Fractionation, Liquefaction, Refrigeration System
+ Compressor
4. Pump Basic Theory
+ Centrifugal Pump
+ Conservation of Mass
+ Specific Velocity
+ Pump Performance
+ Cavitations
5. Pump Specification
+ Pump Specification
+ Flow Capacity
+ Fluid Properties
+ Head
+ Net Positive Heads
+ Rotation Determination and Pump Types
+ Viscous Fluid Correction
+ Material Selection
+ Prime Movers Selection
6. Pump Application
+ Pump Installation Plan
+ Pump Application Example
7. Pump Contruction
+ Pump Classification by Impeller
+ Pump Classification by Casing
+ Pump Classification by Stage Number
+ Pump Classification by Axis Position
8. Pump Operation
+ Head Capacity Curve
+ Parallel and Serial Operation
+ Capacity Regulator
+ Water Hummer
+ Surging
+ Pressure Fluctuation
+ Automatic Operation
9. Pump Instalation
+ Horizontal Instalation
+ Vertical Instalation
+ Submersible Instalation
+ Pipping System
+ Vibration and Noise Protection
10. Pump Maintenance
+ First Inspection
+ Operation Condition Observation
+ Safety Instrument
+ Maintenance Management
+ Overhaul
11. Pump Trouble Shooting
+ General Trouble Shooting
+ Submersible Pump Trouble Shooting

Who Sould Attend
Technical and non-technical personnel of Oil & Gas Company who involves in or concern with daily onshore & offshore oil & gas surface production facility and equipment operation and maintenance and those who responsible of the continuity and integrity of the surface production and processing operation.

Coordinator
Ir. Wibowo, MT
S2 – ITB, Magister (MS), S1 Teknik Perminyakan UPN Yogyakarta
Geothermal Technology : Teaching the Teachers I & III, Geothermal Institute, The University of Auckland – BPPT – ITB, Juli 1995 & 1996, Oil and Gas Pipeline Transportation System Design, IWPL – IATMI, Preparing Data for Reservoir Simulation dan Water Flooding, Texas A&M Univ. – ITB, Geostatistical Methods in Reservoir Characterization, The Use of Fractals for Reservoir Characterization and EOR Processes, USC – ITB

Pengalaman Kerja dan Profesi  : Studi Analisis Memory Production Log Test (MPLT), PT. Nesitor Jakarta, 2006, Ahli Utama Teknik (Senior Petroleum Engineer) bidang Teknik Reservoir Migas pada PT. Schlumberger Geophysics Nusantara, untuk Bidang Keteknikan Reservoir PT. Pertamina (Persero) DOH-Jawa

Facilities
* Module
* Certificate
* Souvenir
* Training Kit

Course Methode
* Presentation
* Discussion
* Case Study
* Simulation
* Practice
* Evaluation

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING OIL & GAS SURFACE FACILITIES

TRAINING OIL & GAS SURFACE FACILITIES

TRAINING OIL & GAS SURFACE FACILITIES

Training Fasilitas Surface Minyak Dan Gas

Training Mengenal Konsep Dasar Penangan Minyak Dan Gas

training fasilitas surface minyak dan gas murah

Description

After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
* Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.
* Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
* Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system

Outline:
* Introduction to Oil and Gas Production Operation
* Oil Surface Production Facilities

1. Well Equipments
2. Pigging System
3. Separator
4. Gas Scrubber
5. Gas Dehydarator
6. Pumps : Centrifugal, Reciprocating, Diaphragm

* Gas Surface Processing Facilities

1. Gas Sweetening
2. Heat Exchanger
3. Fractionation, Liquefaction, Refrigeration System
4. Compressor

* Pump Basic Theory

1. Centrifugal Pump
2. Conservation of Mass
3. Specific Velocity
4. Pump Performance
5. Cavitations

* Pump Specification

1. Pump Specification
2. Flow Capacity
3. Fluid Properties
4. Head
5. Net Positive Heads
6. Rotation Determination and Pump Types
7. Viscous Fluid Correction
8. Material Selection
9. Prime Movers Selection

* Pump Application

1. Pump Installation Plan
2. Pump Application Example

* Pump Construction

1. Pump Classification by Impeller
2. Pump Classification by Casing
3. Pump Classification by Stage Number
4. Pump Classification by Axis Position

* Pump Operation

1. Head Capacity Curve
2. Parallel and Serial Operation
3. Capacity Regulator
4. Water Hummer
5. Surging
6. Pressure Fluctuation
7. Automatic Operation

* Pump Instalation

1. Horizontal Instalation
2. Vertical Instalation
3. Submersible Instalation
4. Pipping System
5. Vibration and Noise Protection

* Pump Maintenance

1. First Inspection
2. Operation Condition Observation
3. Safety Instrument
4. Maintenance Management
5. Overhaul

* Pump Trouble Shooting

1. General Trouble Shooting
2. Submersible Pump Trouble Shooting

Who Should Attend

Technical and non-technical personnel of Oil & Gas Company who involves in or concern with daily onshore & offshore oil & gas surface production facility and equipment operation and maintenance and those who responsible of the continuity and integrity of the surface production and processing operation.

Instruktur :

Ir. Wibowo, MT

S2 – ITB, Magister (MS), S1 Teknik Perminyakan UPN Yogyakarta

Geothermal Technology : Teaching the Teachers I & III, Geothermal Institute, The University of Auckland – BPPT – ITB, Juli 1995 & 1996, Oil and Gas Pipeline Transportation System Design, IWPL – IATMI, Preparing Data for Reservoir Simulation dan Water Flooding, Texas A&M Univ. – ITB, Geostatistical Methods in Reservoir Characterization, The Use of Fractals for Reservoir Characterization and EOR Processes, USC – ITB

Pengalaman Kerja dan Profesi  : Studi Analisis Memory Production Log Test (MPLT), PT. Nesitor Jakarta, 2006, Ahli Utama Teknik (Senior Petroleum Engineer) bidang Teknik Reservoir Migas pada PT. Schlumberger Geophysics Nusantara, untuk Bidang Keteknikan Reservoir PT. Pertamina (Persero) DOH-Jawa

Course Method
* Presentation
* Discussion
* Case Study
* Simulation
* Practice
* Evaluation

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING OIL & GAS SURFACE PRODUCTION OPERATIONS AND FACILITY

TRAINING OIL & GAS SURFACE PRODUCTION OPERATIONS AND FACILITY

TRAINING OIL & GAS SURFACE PRODUCTION OPERATIONS AND FACILITY

Training Oil Surface Production

Training Operasi Produksi

training oil surface production murah

The job of a production facility is to separate the well stream into three components, typically called ‘phases’ (gas, oil, and water), and process these phases into some marketable product or dispose of them in an environmentally acceptable manner. Water often flows into a well along with oil and gas. All these fluids are collected by surface equipment for separation into gas, oil, and water fractions for storage and distribution. The water, which contains salt and other minerals, is usually injected into formations that are well separated from freshwater aquifers close to the surface. In many cases it is put back into the formation from which it came. At times, produced water forms an emulsion with the oil or a solid hydrate compound with the gas. In those cases, specially designed treaters are used to separate the three components. The clean crude oil is sent to storage at near atmospheric pressure. Natural gas is usually piped directly to a central processing plant (called a gasoline plant),
where the remaining liquids (LOGs) are removed before it is fed to the consumer pipeline.
Therefore, The facility must provide well testing and measurement so that gas, oil, and water can be properly allocated to each well. To separate the well stream into three components as mention above, engineer must known well about separator. Separator will utilize the force of gravity to separate gas and oil mixtures. Therefore, separator is one of crucial surface facility. Other than separator, there are many other surface facility that crucial for oil and gas production.

However, while tending to this facility, some problem must be arising. The problem is circulating around pressure cumulative production, hydrate formation, sour gas production, corrosion, and sulfur deposition. Hence, we need to know how to solve this problem and also how to maintain surface facility so that the oil production will proceed well. This practical approach course is designed to provide a comprehensive understanding of Surface Production Facility, Process, Operation and Maintenance. It will be presented in order to fulfill the needs of all technical and non-technical (field and headquartered) personnel of Oil & Gas Company who involves in or concern with onshore or offshore Oil & Gas Surface Production Facility, Process, Operation and Maintenance, you should participate in this course.

COURSE CONTENT :
* Surface Production Processing and Flow Diagram
* Production Separators, Flowlines, Heater-Treater and Storage Tanks
* Gas Gathering & Compression
* Gas Processing and Sour Gas Treating
* Gas Pipeline Problems and Troubleshooting

Active participation is encouraged through case studies and examples. It is possible to tailor for specific goal, upon request. The training will be delivered in the form of classroom exposition, case studies and open discussion.

Who Will You Meet ?
All technical and non-technical (field and headquartered) personnel of Oil & Gas Company who involves in or concern with onshore or offshore Oil & Gas Surface Production Facility, Process, Operation and Maintenance.

What Will You Get After Completing This Course? After completion, participants will:
Understand why oil & gas must be processed in near well surface production facility, how the process is carried out, what equipment and components are needed, how each equipment works, and what are the goals to be achieved in each stage, in both technical and economical point of views.
Better classify requirements for each separation process and specification of vessels, columns, piping, valves, pump, compressor and related devices used in surface operations and improve knowledge on safety, inspection, maintenance and troubleshooting of the whole system.

INSTRUCTOR

In this comprehensive course, you will be assisted by a compatible Instructor, Hilman Ahmad, IR. DCE , He is an an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Bandung Industrial Oil & Gas Education Center. He has been practicing production operation and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000. He has been delivering training course in production operation and maintenance and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING OIL & GAS MEASUREMENT AND CALCULATION

TRAINING OIL & GAS MEASUREMENT AND CALCULATION

TRAINING OIL & GAS MEASUREMENT AND CALCULATION

Training Peralatan Migas

Training Pengenalan Flow Measurement

training peralatan migas murah

INTRODUCTION AND OBJECTIVE

This training presents the principles, design, and applications of flow measurement systems, emphasizing flowmeter accuracy, performance, sizing, and specification, selection, and installation practices with objectives as follows :
* To design a system to make practical and precise industrial flow measurements
* To Calculate the effects of fluid properties on flow meter performance
* To Evaluate flow meter performance statements and compare them with application requirements
* To Specify and select the appropriate flow meters for different applications
* To Identify requirements for flow meter calibration
* To Solve typical flow meter problems
* To Perform flow meter compensation and totalization calculations
* To Understand flow and related phenomena (piping hydraulics, Reynolds Number, cavitation, etc.)
* To Size flow elements for specific applications

TRAINING MATERIAL OUTLINE
* Introduction to Flow Measurement
* Flow meter Selection
* Flow meter Performance
* Linearization and Compensation
* Totalization : Differential Pressure Flow meters
* Orifice Plate Flow meters
+ Installations
+ Sizing and calculation
+ Accuracy and rangeability
+ Types and selection
+ Performance
* V-cone Flow meters
* Venturi tube Flow meters : Velocity Flow meters
* Turbine Flow meters
+ Operation theory
+ Installation
+ Design and construction
+ Accuracy
+ Sizing and selection
* Ultrasonic Flow meters
+ Operation theory
+ The Doppler effect
+ The transit time
+ Design variations
+ Application and performance
* Magnetic Flow meters
+ Operation theory
+ Installation
+ Excitation
+ Tubes and liners
+ Electrodes
+ Selection and sizing
* Vortex Flow meters
+ Operation theory
+ Installation
+ Sizing and accuracy
+ Limitations
+ Mass Flow meters
* Coriolis Mass Flow meters
+ Operation theory
+ Installation
+ Sizing and accuracy
+ Limitations
* Thermal Flow meters
* Positive Displacement Flow meters:
+ Helical Gear
+ Oval Gear
+ Piston and Other Technologies
* Discussion and cases study

INSTRUCTOR

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.  Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.   Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production
Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.  Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING OIL ANALISYS DAN TRIBOLOGY

TRAINING OIL ANALISYS DAN TRIBOLOGY

TRAINING OIL ANALISYS DAN TRIBOLOGY

Training Analisa Minyak Dan Tribology

Training Pengetahuan Dasar Tentang Oil Analysis

training analisa minyak dan tribology murah

LATAR BELAKANG
Lubricant merupakan salah satu factor penting dalam kegiatan maintenance, untuk itu diperlukan pengalaman dan pengetahuan tentang dasar-dasar system pelumasan untuk menjaaga kondisi operasi bantalan tetap aman dan bebas dari kegagalan. Memantau kondisi operasi suatu mesin serta pemilihan pelumas yang tepat akan menjaga sebuah kinerja mesin agar tetap dapat berjalan dengan optimal dan awet.
Dalam pelatihan ini juga akan dibahas mengenai bagaimana menganalisis sumber gangguan dan sistematika analisa kerusakan pada bantalan, serta kemungkina untuk melakukan modifikasi system pelumasan dan konstruksi untuk menghindari kerusakan mesin. Dengan pemilihan pelumas dan cara pelumasan yang tepat maka seorang operator akan mampu merawat dan mengoperasikan suatu mesin dengan lebih baik, sehingga suatu operasi produksi pada suatu mesin akan dapat dijalankan lebh optimal
Secara garis besar Oil Analisys meliputi : Analisis Sifat Minyak Termasuk Minyak Dasar dan Aditifnya, Analisis Kontaminan, dan  Analisis Padatan Ikutan Dari Proses Mesin. Sedangkan tribology adalah ilmu dan teknik interaksi permukaan dalam gerakan relatif. Ini mencakup studi dan penerapan prinsip-prinsip gesekan, pelumasan dan keausan. Seorang Tribologists sering melakukan atau menginterpretasikan data analisis minyak.
Selain melakukan pemantauan kontaminasi minyak dan logam pakai, penggunaan Oil Analisys Modern meliputi analisis tambahan dalam minyak untuk menentukan apakah suatu interval pembuangan dan penggantian  lubrikan dapat diperpanjang, sehingga biaya pemeliharaan dapat dikurangi dengan menggunakan Oil Analisys untuk menentukan sisa masa manfaat aditif dalam minyak. Dengan membandingkan hasil Oil Analysis dari lubrican yang baru dan minyak digunakan, tribologist dapat menentukan kapan minyak harus diganti. Analisis yang serius bahkan memungkinkan minyak akan menjadi “sweetened” seperti tingkat aditif aslinya dengan menambahkan fresh oil atau mengisi kembali aditif yang habis.

BENTUK DAN METODE KEGIATAN
Materi pelatihan disampaikan dengan menggunakan metode interaktif (roleplay dan simulasi), dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan. Evaluasi pada akhir pelatihan mencakup penilaian terhadap instruktur, materi training, manfaat & efektifitas training serta rekomendasi dari peserta.

TUJUAN KEGIATAN
Tujuan dari pelatihan ini adalah :
* Memberikan pengetahuan tentang dasar-dasar Oil Analisys.
* Memberikan pengetahuan tentang dasar-dasar dan konsep Tribology.
* Implementasi dari pengetahuan tentang Oil Analysys dan Tribology

Sasaran Peserta Pelatihan

Karyawan bagian  Maintenance,  Reliability, Lubrication, Craftsmen and Millwrights, Equipment Operators, Manufacturing and Industrial, Predictive Maintenance, Laboratory Analysts, berbagai level jabatan baik operator, supervisor, dan manager.

MATERI PELATIHAN

HARI -1 :

Fundamental of Tribology
* Conformal and non-conformal contact
* Friction phenomena
* Wear phenomena
* Lubrication principle
* Hydrodynamic bearing
* Hydrostatic bearing
* Rolling Element bearing

Wear Metal analysis (spectroscopy, analytical ferrography or micro patch)
* Spectroscopy analysis
* Ferrography analysis
* Particle counter method

Wear phenomena, mechanism and it’s causes
* Wear phenomena
* Wear mechanism
* Causes of wear

HARI – 2 :

Lubricant Roles and Functions
* Base oil
* Additive functions
* Synthetic lubricants
* Lubrication regimes

Oil Analysis Maintenance Strategies
* Fundamental aspects of Reliability-Centered Maintenance (RCM)
* Fundamental aspects of Condition-Based Maintenance (CBM)

Oil Sampling
* Objectives for lube oil sampling
* Equipment specific sampling
* Sampling methods
* Managing interference
* Sampling process management

HARI – 3 :

Lubricant Health Monitoring
* Lubricant failure mechanisms
* Testing for wrong or mixed lubricants
* Fluid properties test methods and measurement units

Lubricant Contamination Measurement and Control
* Particle contamination
* Moisture contamination
* Soot contamination
* Fuel contamination (fuel dilution in oil)
* Air contamination (air in oil)

Wear Debris Monitoring and Analysis
* Common wear mechanisms
* Detecting abnormal wear
* Wear debris analysis

Instruktur

Ir. RINI DHARMASTITI, MSc, Phd

Instruktur menyelesaikan program Doktoral dari School of Mechaniacal engineering Leed University UK tahun 2001, saat ini menjabat sebagai Tim Ahli Bidang Teknik Dan Penngelola Lab Hidrodinamika Fakultas Teknik Universitas Gajah Mada Yogyakarta, Bidang keahlian yang menjadi kompetensinya adalah Bidang Tribology dan Biodinamika Enginering.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING OIL ANALYSIS AND TRIBOLOGY

TRAINING OIL ANALYSIS AND TRIBOLOGY

TRAINING OIL ANALYSIS AND TRIBOLOGY

Training Lubricant Fundamentals

Training Machine Lubricant Analyst

training lubricant fundamentals murah

DESCRIPTION
To improve reliability of plant, many companies implement predictive maintenance program that using various technology to monitor machine health and eliminate at least reduce unplanned breakdown and extend MTBF of machine.
As vibration, oil analysis is important technology in monitoring critical machine. Gearbox and turbine are examples machines that more powerful if monitored using oil analysis technology.
Common problem that occurred are method and procedure of sampling oil, interpretation of oil analysis report and non integration of oil analysis report with other technology like vibration. This course explain how to good sample method, how to analyze data, interpret report and how to integrate oil analysis data with vibration to build comprehensive report.
This course is designed to help you prepare for the Machine Lubricant Analyst (MLA) certification. It covers foundational oil analysis information including oil sampling, lubricant health monitoring, contamination measurement and control, and wear debris monitoring.

OBJECTIVE
This course is designed for participants in order to improve knowledge and skill in
•    Understanding if you are using the wrong oil
•    Squeeze maximum life out lubrication
•    Set optimum Oil analysis limit
•    Capable to take oil sampling with correct method and procedure
•    Have capability to analyze and building report

OUTLINE
1. Introduction
?    The case for condition-monitoring
2. Lubricant Fundamentals
?    The History of oil
?    Functions of Lubricating Oil
?    Lubrication films
?    Mineral oil refining
?    Properties of Base Oil
?    viscosity and Classification
?    Oil Additives
?    Synthetic oils
?    Classification of oils
?    Performance Tests
3. Lubricant Performance Tests
?    Acid & Base Numbers
?    Pour & Flash Points
?    Specific & API Gravity
?    Seal compatibility
?    Color
?    Foaming, Dispersancy, Demulsibility,
?    Filterability
?    Rust & Corrosion
?    Oxidation & Thermal Stability
?    Tribological Testing
4. Lubricant Analysis
This module provides a detailed analysis of the methods utilized to detect Contamination, Fluid Degradation and Wear & Fatigue in lubricants.
?    Dirt
?    Rust & Corrosion
?    Glycol, Soot, Fuel
?    Nitration, Sulphation
?    Process Contaminants
?    Viscosity
?    Acid & Base Numbers
?    Fourier-Transform Infra-Red
?    Karl Fischer
?    Gas Chromatography
?    Particle Count
?    Elemental Analysis (ICP, AA, XRF)
5. Grease Fundamentals
?    Functions of Grease
?    Base oils, Additives and Soaps
?    Properties of Grease
?    Analysis of Grease for Predictive Maintenance
6. Program Management
?    Maintenance Strategies
?    The role of Oil Analysis
?    Setting Program Goals
?    Oil Sampling
?    Completing Sample Information
?    Reading Oil Analysis Sample Reports

PARTICIPANTS
•    All Maintenance Professionals
•    Reliability Engineers
•    Lubrication Engineers
•    Craftsmen and Millwrights
•    Equipment Operators
•    Operations & Maintenance Managers
•    Lubrication Technicians
•    Manufacturing and Industrial Engineers
•    Maintenance Supervisors
•    Vibration Instrument Specialists
•    Predictive Maintenance Technicians
•    Laboratory Analysts

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING OIL ANALYSIS TRANSFORMER

TRAINING OIL ANALYSIS TRANSFORMER

TRAINING OIL ANALYSIS TRANSFORMER

Training Pengujian Oli Transformer

Training Diagnosa Transformator

training pengujian oli transformer murah

Deskripsi
Pelatihan ini akan lebih fokus terhadap bagaimana menentukan kondisi baik tidaknya sebuah transformer dengan menganalisa beberapa data kombinasi hasil pengujian oli transformer, dalam hal ini hasil data pengujian BDV, KOH dan DGA dengan menggunakan beberapa metode analisa untuk pengambilan keputusan secara teknis maupun biaya dengan cepat dan tepat.

Materi
•Metode pemeliharaan peralatan : definisi, prinsip dan perbedaannya
•Konstruksi umum distribution transformer type ONAN ( Oil Natural Air Natural )
•Diagnosa Transformator : diagram alir dan diagram pengujian
•Minyak Transformator : fungsi, karakteristik dan keunggulannya sebagai bahan insulator
•Dissolve Gas di Minyak Transformator : definisi, proses Dissolve Gas, Fault gases, dan metode pendeteksian fault gases
•DGA ( Dissolved Gas Analysis ) : definisi, fungsi, metode pengujian, analisa dan interpretasi
•Analisa biaya : kemungkinan penyebab kerusakan & biaya yang diakibatkan kerusakan

Peserta
Semua karyawan yang berhubungan dengan pengambilan keputusan teknis baik dari level teknisi, engineer, supervisor maupun manajer pada departemen atau divisi suatu perusahaan :
•Utility facility
•Maintenance
•Testing & Commisioning
•Engineering
•Maintenance planner
•Condition Monitoring
•Electrical consultant

Metode
•Presentation
•Discussion
•Simulation
•Case Study
•Evaluation

Instruktur
Tugino, ST , MT
(CV Instruktur Terlampir)

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

Tanyakan pada kami ?

Kami di sini untuk membantu Anda! Jangan ragu untuk menanyakan apapun kepada kami. Klik di bawah untuk memulai obrolan.

Marketing

Pitaloka

Online

Marketing

Susan

Online

Pitaloka

Hai, tanyakan pada kami ? 00.00

Susan

Hai, tanyakan pada kami ? 00.00