TRAINING GAS COMPRESSION & FLOW METERING

TRAINING GAS COMPRESSION & FLOW METERING

TRAINING GAS COMPRESSION & FLOW METERING

Training Kompresi Gas & Pengukur Aliran

Training Reciprocating Compressors

training kompresi gas & pengukur aliran murah

Gas production operations often require compressors to raise the pressure of the gas. This is accompanied by change of state of the gas which means change in temperature and volume of a quantum of gas going under compression . The most important ofcompressors such as providing enough pressure to a gas transport through transmission and distribution systems, reinjection of gas for pressure maintenance, circulation of gas through the process or system, raising gas pressure to the required level for a chemical processing reaction,etc. The compression calculations in the natural gas industry must be accurate and its of paramount importance for the gas industry. If an error occurs even though only 1.0 percent in the measurement of natural gas in the pipeline, this will give a loss either the seller or the purchaser amount of million a year, and certainly this is a bad thing and can be detrimental to the oil & gas company. Not only compression calculation but also the accuration of flow metering is
importance. The Flow is one of the most difficult variable to measure, because it cannot be measured directly like pressure and temperature. It must be inferred by indirect means, such as pressure differential over a specified distance, speed of rotation of a rotating element, displacement rate in a measurement chamber, etc.

Course Outlines Gas Compression & Flow Metering:

Day 1

Overview of Gas Compression
* Field gas compression systems.
* Inlet gas compression prior to treating.
* Outlet gas compression prior to export pipeline.
* Compression for gas lift, gas gathering, condensate recovery,

transmission & distribution, gas re-injection & pressure maintenance.

Type of Compressor
* Positive-displacement or intermittent
* Flow and continuous flow units.
* Reciprocating compressors.
* Rotary positive-displacement and centrifugal compressors.
* Axial and mixed-flow compressors.
* Comparison between compressors and compressor selection.

Day 2

Basics and Performance of Gas Compression
* Isothermal, isentropic and polytropic ideal compression processes.
* Real gas behavior and compression ratio.
* Design and determination of the number of stages.
* Inlet flow rate and compression power calculation.
* Compressor control and performance maps.
* Nomograph for estimating compressor performance.
* Estimation of HP required for compressing natural gas.
* Performance testing guidelines for centrifugal compressors.

Day 3

Practical Guide to Accurate Flow Measurement.
* Requisites of flow measurement and reference standards .
* Custody and non-custody transfer.
* Flow installation requirements and operational considerations.
* Maintenance meter equipment, readouts and related devices.
* Proving systems and auditing.
* Accuracy, rangability and turndown.
* Head type and mechanical type.
* Electronic flowmeter and mass flowmeter.

Day 4

Practical Aspects of Flow Metering.
* Orifice plate, venturi, flow nozzle and Pitot tube.
* Variables area meters.
* Mechanical flowmeters.
* Turbin and rotary flowmeters.
* Electronic and vortex flowmeters.
* Ultrasonic flowmeters.
* Mass flowmeters.
* Coriolis flowmeters.
* Thermal mass flowmeters.

Instructor

Hilman Ahmad

This course will be conducted by Hilman Ahmad & Associates, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Bandung Industrial Oil & Gas Education Center.

He has been practicing production operation and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.

He has been delivering training course in production operation and maintenance and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia  2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024

Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024

Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024

Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024

Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024

Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024

Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

Post Views: 95