TRAINING OIL WELL CONTROL & PRE-TEST IWCF

TRAINING OIL WELL CONTROL & PRE-TEST IWCF

TRAINING OIL WELL CONTROL & PRE-TEST IWCF

Training Oil Well Control

Training International Well Control

training oil well control murah

Overwiev

Well control is the management of the dangerous effects of unexpected high pressures on the surface equipment of drilling rigs searching for oil and/or gas. Some type of drilling fluid is generally used to aid in well control. Failure to manage and control these pressure effects can cause serious equipment damage and injury/loss of life. Well control situations that are improperly managed cause blowouts, which is the uncontrolled and explosive expulsion of fluids from the well, usually resulting in a fire.

Well control includes the monitoring for the symptoms of impending pressure imbalance situations and the procedures for operating well site equipment to understand the situation and take remedial actions.

This Course could give a lot of benefits for personnel who involved in drilling/well control operations and also who may be attending well control instruction and assessment for the first time. Introductory training designed to give potential well control certification candidates an awareness of well control theory, practices and equipment in order to prepare them for testing.

The International Well Control Forum is an oil industry Membership Organization established in Europe in 1992. Its primary purpose is to develop and administer well control certification programs for personnel employed in oil well Drilling, Work over and Well Intervention operations.

Training Outline

2-DAY (By Dr. –Ing Bonar Tua Halomoan Marbun)
* INTRODUCTION- BASIC OVERVIEW
* LESSON ONE: CAUSES OF KICKS
* LESSON TWO: KICK WARNING SIGNS
* LESSON THREE: KICK INDICATORS
* LESSON FOUR: SHUT IN PROCEDURES
* LESSON FIVE: KILL METHODS
* LESSON SIX: BOP EQUIPMENT

Equipment

2-DAY (BY FUAD RUHUDDIN)

PRE-TEST IWCF

Instructor

Dr. –Ing. Bonar Tua Halomoan Marbun

Dr. –Ing. Bonar Tua Halomoan Marbun finished his bachelor degree in Bandung Institute of Technology majoring Petroleum Engineering. In 2000, he deepened his Petroleum Science in Clausthal University of Technology, Institute of Petroleum Engineering, Clausthal-Zellenfeld, Germany. After that he continued his studies, taking Dr. –Ingenieur in the field of Material Engineering and Science in Clausthal University of Technology, Institute of Non-Metallic Materials, Clausthal-Zellenfeld, Germany.

During his studies in Germany, he also graduated several research associate: Research and Development Activities for DGMK, Holding of lesson and practical exercises about drilling & cementing engineering for advanced students in petroleum engineering, Hydration kinetics of CaO and MgO, research and development of CaO and MgO as Additive for Oil, Gas and Geothermal Cement, Design of Burning Regime, Invention of a miniaturized slaking apparatus, establishing of new evaluation algorithms of wet slaking curve, synthesis and characterization of calcium-aluminate-silicate-hydrates, definition and synthesis of new building materials with enhanced fire resistance on the basis of stratlingitse, holding of lessons and practical exercises about lime & magnesia production and its properties for advanced students in material science and engineering and petroleum engineering.

Before continuing his study in Germany, he worked in ARCO as a Mechanic for Refrigeration System and in Mobil Oil for algorithms and simulation of underbalanced drilling. After finishing his Doctoral Degree, he continued working in Germany for four years. He spent two years working in Pyroprocessing and Environmental Technology, Research and Development Centre, ThyssenKrupp-Polyisius AG, Beckum, Germany, as a Development Engineer. Thereafter, he had been working as a Process and Environmental Engineer in Research Institute for Cement Industry, German Cement works Association, Dusseldorf, Germany for two years. From April 2010 until now on, he went back to Indonesia, and dedicated him self to his faculty, Petroleum Engineering Department, ITB, as a Lecturer. He is also works as a staff Research Group of Drilling, Production and Oil & Gas Management.

Dr. –Ing. Bonar Tua Halomoan Marbun also got several certificated laboratory practices and analysis: X-Ray Diffractometer (XRD), X-Ray Fuorescence Sprectometer (XFS), Positron Annihilation Lifetime Spectroscopy (PALS), Nuclear Magnetic Resonance Spectrometer (NMRS), Electron Spectroscopy for Chemical Analysis (ESCA), Secondary Ion Mass Spectometer (SIMS), Differential Thermal Analysis (DTA), Thermogravimetric Analysis (TG) & Differential Scanning Calorimeter (DSC).

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia  2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024

Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024

Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024

Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024

Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024

Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024

Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,