TRAINING SURFACE PRODUCTION FACILITIES

TRAINING SURFACE PRODUCTION FACILITIES

TRAINING SURFACE PRODUCTION FACILITIES

Training Fasilitas Produksi Surface

Training Gas Handling Facilities

training fasilitas produksi surface murah

OBJECTIVES :
After participate in thid course, the participants will be abble and cappable to :
* Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
* Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
* Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
* Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE:
No specified (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:
1. Gas Handling Facilities
+ • Introduction to Gas Handling and Facilities
+ • Gas Properties
o ? Ideal gas
o ? Real Gas
o ? Gas Formation Volume Factor
o ? Gas Compressibility
o ? Gas-Water System
o ? Gas-Condensate System
+ • Gas Reservioir Performance
o ? Reservoir Gas Flow
o ? Gas Reserves
o ? Well Completion Effect
o ? Tight Gas Well
o ? Gas Well Testing
+ • Gas Piping System
o ? Basic Flow Equation
o ? Flow in Wells and Flow in Pipelines
o ? Effect of Liquids
o ? Use of Pressure Traverse Curve
o ? Liquid Removal from Gas Wells
+ • Gas Compression
o ? Type of Compressors
o ? Compressor Design
o ? Centrifugal Compressor
+ • Total System Analysis
o ? Tubing and Flow Line Effect
o ? Separator Pressure Effect
o ? Compressor Selection
+ • Flow Measuring
o ? Orifice Metering
o ? Metering System Design
o ? Other Metering Methods
+ • Gas Condensate Reservoir
o ? Well Testing and Sampling
o ? Gas Cycling
+ • Field Operation Problems
o ? Pressure Cumulative Production Plot
o ? Hydrate Formation
o ? Sour Gas Production
o ? Corrosion Control With Inhibitors
o ? Sulfur Deposition
+ • Gas Processing
o ? Field treatment of Natural Gas
o ? Gas Plant Operation
o ? Gas Dehydration
o ? Gas Sweetening
2. Oil Handling Facilities
+ • Oil Well Surface Production Equipment and Operation
o ? Oil Well Equipment
o ? Oil Well Production Operation
o ? Well Automatic Safety Device
+ • Oil Gathering System. Manifold and Flowline
o ? Oil Gathering System
o ? Maniflod System
o ? Flowline Sizing and Design
+ • Crude Oil and Gas Separation
o ? Separator and Principle of Separation
o ? Design of Separator
o ? Oil Dehydration
+ • Principles of Measurement
o ? Introduction to Measurement
o ? Crude Oil Measurement
o ? Gas Measurement
+ • Well Test
o ? Introduction
o ? Responsibility for Test
o ? Preparation for Test
o ? Types of Well Test
o ? Equipment and Procedures
o ? Accuracy of Fluid Measurement
o ? Problem in Testing
o ? Type of Test

INSTRUCTOR :
Dr.Ir. Sudjati Rachmat, DEA

DR. IR. SUDJATI RACHMAT, DEA was graduated from Petroleum Engineering Department of ITB in 1979 and hold Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France. The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Fluid Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA,

CO-INSTRUCTOR : Ir. Gilang Airlangga

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia  2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024

Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024

Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024

Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024

Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024

Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024

Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

Post Views: 148