Oil & Gas Archives - Page 25 of 50

TRAINING LUBE OIL ANALYSIS AND TRIBOLOGY

Training Analyze And Building Report

Training Contamination Measurement And Control

Description

To improve reliability of plant, many companies implement predictive maintenance program that using various technology to monitor machine health and eliminate at least reduce unplanned breakdown and extend MTBF of machine.

As vibration, oil analysis is important technology in monitoring critical machine. Gearbox and turbine are examples machines that more powerful if monitored using oil analysis technology.

Common problem that occurred are method and procedure of sampling oil, interpretation of oil analysis report and non integration of oil analysis report with other technology like vibration. This course explain how to good sample method, how to analyze data, interpret report and how to integrate oil analysis data with vibration to build comprehensive report.

This course is designed to help you prepare for the Machine Lubricant Analyst (MLA) certification. It covers foundational oil analysis information including oil sampling, lubricant health monitoring, contamination measurement and control, and wear debris monitoring.
lube oil analysis and tribology lube oil analysis and tribology

Objectives

This course is designed for participants in order to improve knowledge and skill in
* Understanding if you are using the wrong oil
* Squeeze maximum life out lubrication
* Set optimum Oil analysis limit
* Capable to take oil sampling with correct method and procedure
* Have capability to analyze and building report

Outline

1. Introduction

* The case for condition-monitoring

2. Lubricant Fundamentals

* The History of oil
* Functions of Lubricating Oil
* Lubrication films
* Mineral oil refining
* Properties of Base Oil
* viscosity and Classification
* Oil Additives
* Synthetic oils
* Classification of oils
* Performance Tests

3. Lubricant Performance Tests

* Acid & Base Numbers
* Pour & Flash Points
* Specific & API Gravity
* Seal compatibility
* Color
* Foaming, Dispersancy, Demulsibility,
* Filterability
* Rust & Corrosion
* Oxidation & Thermal Stability
* Tribological Testing

4. Lubricant Analysis

This module provides a detailed analysis of the methods utilized to detect Contamination, Fluid Degradation and Wear & Fatigue in lubricants.
* Dirt
* Rust & Corrosion
* Glycol, Soot, Fuel
* Nitration, Sulphation
* Process Contaminants
* Viscosity
* Acid & Base Numbers
* Fourier-Transform Infra-Red
* Karl Fischer
* Gas Chromatography
* Particle Count
* Elemental Analysis (ICP, AA, XRF)

5. Grease Fundamentals

* Functions of Grease
* Base oils, Additives and Soaps
* Properties of Grease
* Analysis of Grease for Predictive Maintenance

6. Program Management

* Maintenance Strategies
* The role of Oil Analysis
* Setting Program Goals
* Oil Sampling
* Completing Sample Information
* Reading Oil Analysis Sample Reports

Participants

* All Maintenance Professionals
* Reliability Engineers
* Lubrication Engineers
* Craftsmen and Millwrights
* Equipment Operators
* Operations & Maintenance Managers
* Lubrication Technicians
* Manufacturing and Industrial Engineers
* Maintenance Supervisors
* Vibration Instrument Specialists
* Predictive Maintenance Technicians
* Laboratory Analysts

Instructor

Ir. Janu Pardadi, M.T.

Expert in Mechanical, Manufacture Engineering, Internal Combustion Engine, Material Design, Tribology and Corrosions

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025
- BATCH 1 : 13-14 Januari 2025
- BATCH 2 : 10-11 Februari 2025
- BATCH 3 : 10-11 Maret 2025
- BATCH 4 : 14-15 April 2025
- BATCH 5 : 15-16 Mei 2025
- BATCH 6 : 12-13 Juni 2025
- BATCH 7 : 10-11 Juli 2025
- BATCH 8 : 18-19 Agustus 2025
- BATCH 9 : 17-18 September 2025
- BATCH 10 : 16-17 Oktober 2025
- BATCH 11 : 13-14 November 2025
- BATCH 12 : 15-16 Desember 2025
TEMPAT PELAKSANAAN PELATIHAN
- REGULER TRAINING
  - YOGYAKARTA, Hotel Dafam Malioboro
  - JAKARTA, Hotel Amaris Tendean
  - BANDUNG, Hotel Golden Flower
  - SURABAYA
  - BALI, Hotel Ibis Kuta
  - LOMBOK – NTB
- ONLINE TRAINING VIA ZOOM
- IN HOUSE TRAINING
Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
- FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
- Module / Handout training terupdate
- FREE Flashdisk
- Sertifikat training teknik komunikasi murah
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training lube oil analysis and tribology pasti jalan,training analyze and building report pasti jalan,training contamination measurement and control pasti jalan,training lubricant fundamentals pasti jalan,pelatihan lube oil analysis and tribology pasti jalan,pelatihan analyze and building report pasti running

TRAINING GAS TURBINE TECHNOLOGY

Training Operations And Maintenance Of Gas Turbines

Training Petrochemical And Pipeline Industries

DESKRIPSI
The use of Gas Turbines in the Power Generation, Petrochemical and Pipeline Industries has increased considerably in the last few years. The development, in particular, of Combined Cycle and Combined Heat and Power applications has accelerated the use of Industrial Gas Turbines. This course will cover the design, operation and maintenance of the various types of Gas Turbine and Gas Turbine applications. Presenting this course at our facility will allow attendees to see practical examples of Gas Turbine Components, types of component faults and associated repair techniques.

MATERI

• Types of Gas Turbine and Gas Turbine Applications
a. Heavy Duty Gas Turbines
b. Aero-Derivative Gas Turbines
c. Two-shaft Gas Turbines
d. Simple Cycle/Combined Cycle/ Combined Heat and Power Applications
• Major Components of a Gas Turbine
a. Compressor/Combustor/Turbine
• Compressor Components
a. Compressor Design/Effects on Performance
b. Compressor Washing Techniques/Philosophies
• Combustion Components
a. Combustion Liner Design/Types
b. Combustion Liner Materials/Repair
c. Fuel Nozzle Design/Repair
d. Environmental Control for Combustion Systems
? Types Of Environmental Control
? Installation/Retrofitting Environmental Control Systems
• Hot Gas Path Components
a. Blade Materials/Design
b. Nozzle Materials/Design
c. Blade/Nozzle Inspection Techniques (Dye Penetrate, Eddy Current)
d. Blade/Nozzle Defects (Corrosion, Erosion, Oxidation)
e. Coatings and Coating Application Techniques
f. Evaluating Components for Repair
g. Repair Techniques and Materials
• Gas Turbine Systems
a. Lubrication Systems
? Lube Oil Types
? Oil Monitoring and Cleaning
b. Fuel Systems
? Fuel Properties and Selection
? Fuel Measurement
? Supply Systems
? Heavy Fuels and Fuel Dosing
? Fuel Performance Impacts
? Environmental Considerations
c. Bearings
? Types of Bearing
? Bearing Materials and Repairs
d. Additional Systems
? Starting Systems
? Inlet Air Systems/Filtering
• Control Systems
• Types of Control System
• Evaluating/Collecting Control System Data
• Evaluating Control System Retrofits/Upgrades
• Pressure, Temperature and Vibration Monitoring

PESERTA

The primary function of this course is to allow the attendee a detailed understanding of the applications, operations and maintenance of Gas Turbines. Therefore this course is targeted at technicians and engineers involved in the operation and maintenance of Gas Turbines. Experienced engineers and maintenance specialists will also benefit from attending this course as will those managers concerned with the maintenance scheduling and repair aspects of Gas Turbines.

INSTRUKTUR

Ir. JUMANDA KASDADI

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training gas turbine technology pasti jalan,training operations and maintenance of gas turbines pasti jalan,training petrochemical and pipeline industries pasti jalan,training compressor components pasti jalan,pelatihan gas turbine technology pasti jalan,pelatihan operations and maintenance of gas turbines pasti running

TRAINING GAS, OIL AND WATER PIPELINE DESIGN AND MAINTENANCE

Training Gas, Minyak Dan Desain Jalur Pipa Dan Perawatannya

Training Pengenalan Gas, Oil And Water Pipeline Design And Maintenance

INTRODUCTION :
To fulfill the oil and gas demand for power generation, recovery processes, and other uses, pipelines are utilized to transport the supply from their source. These pipelines are mostly buried and operate without disturbing normal pursuits.

Construction procedures for most pipeline systems can be adapted to consider specific environmental conditions and are tailored to cause minimal impact on the environment.

Unattended pumping stations move large volumes of oil and petroleum products under high pressure. Many factors have to be considered in the engineering and design of long-distance pipelines, including the nature and volume of fluid to be transported, the length of pipeline, the types of terrain traversed and the environmental constraints. Major factor influencing pipeline system design are: Fluid properties, design condition, supply and demand magnitude/location, Code and standards, Route, topography and access, environmental impact, economic, hydrological impact, seismic and volcanic impacts.

To obtain optimum results for a pipeline transmission system, complex economic and engineering studies are necessary to decide on the pipeline diameter, material, compression/pumping power requirements and location of the pipeline route.

TRAINING MATERIAL OUTLINE :
1. Overview of Problems in Gas, Oil and Produced Water Pipeline Operations and Maintenance
2. The Pipeline Design Approach and Considerations
3. Design of Gas Transmission Pipeline
4. Design of Crude, Oil and Produced Water Transportation Pipeline
5. Valves, Flanges and Fittings Selection for Crude, Oil, Gas and Produced Water Pipeline Design

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training gas,oil and water pipeline design and maintenance pasti jalan,minyak dan desain jalur pipa dan perawatannya pasti jalan,training pengenalan gas,training desain dan perawatan jalur perpipaan pasti jalan,pelatihan gas,minyak dan desain jalur pipa dan perawatannya pasti running

TRAINING GAS COMPRESSION & FLOW METERING

Training Kompresi Gas & Pengukur Aliran

Training Reciprocating Compressors

Gas production operations often require compressors to raise the pressure of the gas. This is accompanied by change of state of the gas which means change in temperature and volume of a quantum of gas going under compression . The most important ofcompressors such as providing enough pressure to a gas transport through transmission and distribution systems, reinjection of gas for pressure maintenance, circulation of gas through the process or system, raising gas pressure to the required level for a chemical processing reaction,etc. The compression calculations in the natural gas industry must be accurate and its of paramount importance for the gas industry. If an error occurs even though only 1.0 percent in the measurement of natural gas in the pipeline, this will give a loss either the seller or the purchaser amount of million a year, and certainly this is a bad thing and can be detrimental to the oil & gas company. Not only compression calculation but also the accuration of flow metering is
importance. The Flow is one of the most difficult variable to measure, because it cannot be measured directly like pressure and temperature. It must be inferred by indirect means, such as pressure differential over a specified distance, speed of rotation of a rotating element, displacement rate in a measurement chamber, etc.

Course Outlines Gas Compression & Flow Metering:

Day 1

Overview of Gas Compression
* Field gas compression systems.
* Inlet gas compression prior to treating.
* Outlet gas compression prior to export pipeline.
* Compression for gas lift, gas gathering, condensate recovery,

transmission & distribution, gas re-injection & pressure maintenance.

Type of Compressor
* Positive-displacement or intermittent
* Flow and continuous flow units.
* Reciprocating compressors.
* Rotary positive-displacement and centrifugal compressors.
* Axial and mixed-flow compressors.
* Comparison between compressors and compressor selection.

Day 2

Basics and Performance of Gas Compression
* Isothermal, isentropic and polytropic ideal compression processes.
* Real gas behavior and compression ratio.
* Design and determination of the number of stages.
* Inlet flow rate and compression power calculation.
* Compressor control and performance maps.
* Nomograph for estimating compressor performance.
* Estimation of HP required for compressing natural gas.
* Performance testing guidelines for centrifugal compressors.

Day 3

Practical Guide to Accurate Flow Measurement.
* Requisites of flow measurement and reference standards .
* Custody and non-custody transfer.
* Flow installation requirements and operational considerations.
* Maintenance meter equipment, readouts and related devices.
* Proving systems and auditing.
* Accuracy, rangability and turndown.
* Head type and mechanical type.
* Electronic flowmeter and mass flowmeter.

Day 4

Practical Aspects of Flow Metering.
* Orifice plate, venturi, flow nozzle and Pitot tube.
* Variables area meters.
* Mechanical flowmeters.
* Turbin and rotary flowmeters.
* Electronic and vortex flowmeters.
* Ultrasonic flowmeters.
* Mass flowmeters.
* Coriolis flowmeters.
* Thermal mass flowmeters.

Instructor

Hilman Ahmad

This course will be conducted by Hilman Ahmad & Associates, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Bandung Industrial Oil & Gas Education Center.

He has been practicing production operation and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.

He has been delivering training course in production operation and maintenance and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training gas compression & flow metering pasti jalan,training kompresi gas & pengukur aliran pasti jalan,training reciprocating compressors pasti jalan,training real gas behavior and compression ratio pasti jalan,pelatihan gas compression & flow metering pasti jalan,pelatihan kompresi gas & pengukur aliran pasti running

TRAINING GAS COMPRESSOR

Training Operation Gas Compressor

Training Maintenance Gas Compressor

TRAINING OBJECTIVE

After completion of the course, the participants should be able to describe and demonstrate thoroughly of gas-compressors. Identify component by names, operation, maintenance and inspection. Describe the proper care, removal alignment and installation of gas-compressors and their accessories.

WHO SHOULD ATTEND

Gas-compressor operator, supervisor, and to whom may concern in gas-compressor operation and maintenance.

TRAINING MATERIAL OUTLINE GAS COMPRESSOR : OPERATION, MAINTENANCE & TROUBLESHOOTING

* Fundamental of fluid mechanics and thermodynamic
+ Properties of fluids
+ Measurement unit
+ Basic of fluids dynamic
+ Energy losses in pipe installation
+ The gas Laws
+ Specific Heat
+ Compression process
o Isothermal
o Adiabatic
o Polytrophic
+ Compression Work
+ Multistage compression

* Pressure loss at gas pipe installation
+ Definition and accuracy
+ Factors to estimate friction loss
+ Pressure gradient in pipe
o General equation of various gas
o Natural gas piping equation
o Vacuum piping equation
+ Fitting pressure loss
+ Flexible pipe pressure loss

* Fundamental theory of compressor
+ Compressor development history
+ Compressor classification
+ Compressor work cycle
o Theoretic cycle
o Semi theoretic cycle
o Actual cycle
* Centrifugal compressor
* Head, losses and efficiency
* Characteristic at each speed
* Compressor installation

* Dynamic Compressor
+ Performance & condition definition
+ Type of centrifugal compressor
o High casing
o Horizontal split casing
o Vertical split casing
+ Package assembly
+ Multi casing unit
+ Centrifugal compressor application
+ Characteristic of centrifugal compressor
+ General detail of centrifugal compressor
o Impeller
o Diaphragm
o Inter stage packing
o Rotor assembly
o Casing
o Journal and thrust bearing
o Shaft seals
o Seal and lubrication system
o Gas cooling
+ Pressure ratio and centrifugal characteristic curve
+ Control of capacity
o Load curve
o Control method
o Surge control
o Parallel operation
o Unloading start
+ Inner gear air centrifugal compressor
o Modulation pressure control
o Dual step capacity control
o Auto dual control
* Axial flow compressor

* Positive Compressor
+ Application of theory
o Reciprocating compressor
o Clearance control
o Clearance control and variable compression ratio
o Effect of heat specific ratio to horse power
o Peak horse power and break horse power
o Effect of compressibility
o Effect of altitude
+ Reciprocating compressor
o Definition
o Characteristic
o Classification
o Cylinder
o Valve
o Cylinder cooling
o Non-cooled cylinder
o Air cooling cylinder
o Capacity control
o Manual control
o Main automatic control
o Load depletion to start
o Types of control
o Constant speed control
o Suction side throttling
o Variable speed control

* Installation, operation and maintenance
+ Installation
o Placement
o Suction condition
o Foundation
o Piping
o Electric cabling
+ Field testing
o Commissioning
o Running test
+ Operation
+
o Responsibility
o Recording
o Cleaning
o Lubrication
o Safety
o Initial start
o Capacity control
o Spare parts
o Trouble shooting
+ Inspection and maintenance
o Preventive maintenance
o Predictive maintenance

INSTRUCTOR

Ir. I Nengah Diasta, M.Eng. is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.

Ir. I Nengah Diasta, M.Eng. has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

Ir. I Nengah Diasta, M.Eng. has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc. Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX, Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT
TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training gas compressor pasti jalan,training operation gas compressor pasti jalan,training maintenance gas compressor pasti jalan,training troubleshooting gas compressor pasti jalan,pelatihan gas compressor pasti jalan,pelatihan operation gas compressor pasti running

TRAINING GAS COMPRESSOR

Training Operation Gas Compressor

Training Maintenance Gas Compressor

TRAINING OBJECTIVE

WHO SHOULD ATTEND

Gas-compressor operator, supervisor, and to whom may concern in gas-compressor operation and maintenance.

TRAINING MATERIAL OUTLINE GAS COMPRESSOR : OPERATION, MAINTENANCE & TROUBLESHOOTING

INSTRUCTOR

Ir. I Nengah Diasta, M.Eng. has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

TRAINING GAS CONDITIONING AND PROCESSING

Training Kondisi Gas Dan Pengolahan

Training Gas Formation Volume Factor

OBJECTIVES :

After participate in this course, the participants will be able and capable to :
* Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
* Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
* Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
* Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:
* No specified (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Gas Process and Operation
* Gas Properties
+ Ideal gas
+ Real Gas
+ Gas Formation Volume Factor
+ Gas Compressibility
+ Gas-Water System
+ Gas-Condensate System
* Gas Reservoir Performance
+ Reservoir Gas Flow
+ Gas Reserves
+ Well Completion Effect
+ Tight Gas Well
+ Gas Well Testing
* Gas Piping System
+ Basic Flow Equation
+ Flow in Wells and Flow in Pipelines
+ Effect of Liquids
+ Use of Pressure Traverse Curve
+ Liquid Removal from Gas Wells
* Gas Compression
+ Type of Compressors
+ Compressor Design
+ Centrifugal Compressor

Total System Analysis
* Tubing and Flow Line Effect
* Separator Pressure Effect
* Compressor Selection

Flow Measuring
* Orifice Metering
* Metering System Design
* Other Metering Methods

Gas Condensate Reservoir
* Well Testing and Sampling
* Gas Cycling

Field Operation Problems
* Pressure Cumulative Production Plot
* Hydrate Formation
* Sour Gas Production
* Corrosion Control With Inhibitors
* Sulfur Deposition

Gas Processing
* Field treatment of Natural Gas
* Gas Plant Operation
* Gas Dehydration
* Gas Sweetening

INSTRUCTOR :

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training gas conditioning and processing pasti jalan,training kondisi gas dan pengolahan pasti jalan,training gas formation volume factor pasti jalan,training reservoir gas flow pasti jalan,pelatihan gas conditioning and processing pasti jalan,pelatihan kondisi gas dan pengolahan pasti running

TRAINING GAS, OIL AND WATER HANDLING FACILITIES

Training Fasilitas Penanganan Minyak Gas, Minyak Dan Air

Training Gas Handling Facilities

OBJECTIVES :
After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
* Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
* Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
* Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

AUDIENCE:
No specified (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

1. Gas Handling Facilities
* Introduction to Gas Handling and Facilities
* Gas Properties

* Ideal gas
* Real Gas
* Gas Formation Volume Factor
* Gas Compressibility
* Gas-Water System
* Gas-Condensate System

* Gas Reservoir Performance

* Reservoir Gas Flow
* Gas Reserves
* Well Completion Effect
* Tight Gas Well
* Gas Well Testing

* Gas Piping System

* Basic Flow Equation
* Flow in Wells and Flow in Pipelines
* Effect of Liquids
* Use of Pressure Traverse Curve
* Liquid Removal from Gas Wells

* Gas Compression

* Type of Compressors
* Compressor Design
* Centrifugal Compressor

* Total System Analysis

* Tubing and Flow Line Effect
* Separator Pressure Effect
* Compressor Selection

* Flow Measuring

* Orifice Metering
* Metering System Design
* Other Metering Methods

* Gas Condensate Reservoir

* Well Testing and Sampling
* Gas Cycling

* Field Operation Problems

* Pressure Cumulative Production Plot
* Hydrate Formation
* Sour Gas Production
* Corrosion Control With Inhibitors
* Sulfur Deposition

* Gas Processing

* Field treatment of Natural Gas
* Gas Plant Operation
* Gas Dehydration
* Gas Sweetening

2. Oil Handling Facilities
* Oil Well Surface Production Equipment and Operation

* Oil Well Equipment
* Oil Well Production Operation
* Well Automatic Safety Device

* Oil Gathering System. Manifold and Flowline

* Oil Gathering System
* Manifold System
* Flow line Sizing and Design

* Crude Oil and Gas Separation

* Separator and Principle of Separation
* Design of Separator
* Oil Dehydration

* Principles of Measurement

* Introduction to Measurement
* Crude Oil Measurement
* Gas Measurement

* Well Test

* Introduction
* Responsibility for Test
* Preparation for Test
* Types of Well Test
* Equipment and Procedures
* Accuracy of Fluid Measurement
* Problem in Testing
* Type of Test

3. Water Handling Facilities
* The Chemistry of Water

* Chemical and Physical Properties
* Water Sampling Procedures
* Quantitative Analysis of Oilfield Waters
* Water Analysis Techniques

* Water Formed Scales

* Why Scales Form
* Predicting Scale Formation
* Mixing Waters – Compatibility
* Preventing Scale Formation
* Scale Removal Methods

* Corrosion in Water Injection System and Disposal System

* Theory of Corrosion
* The Effect of Metal Composition
* Effect of Water Composition
* Forms of Corrosion
* Corrosion Control Methods
* Corrosion Inhibitors
* Internal Coatings and Linings for Tubular Goods
* Internal Tank Coatings and Cathodic Protection
* Non-Metallic Tubular Goods Types
* Removal of Corrosive Gases from Water
* Oxygen Removal
* Removal of Hydrogen Sulfide from Water
* Removal of Carbon Dioxide from Water
* Oxygen Exclusion
* Design to Minimize Corrosion
* Corrosion Monitoring Techniques

INSTRUCTOR :
1. Dr.Ir. Sudjati Rachmat, DEA

CO-INSTRUCTOR :
2. Ir. Gilang Erlangga

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training gas,oil and water handling facilities pasti jalan,training fasilitas penanganan minyak gas,minyak dan air pasti jalan,training gas handling facilities pasti jalan,training basic flow equation pasti jalan,pelatihan gas,pelatihan fasilitas penanganan minyak gas,minyak dan air pasti running

TRAINING GAS TUNGSTEN ARC WELDING (LAS TIG)

Training Persiapan Elektroda

Training Keistimewaan Proses

LATAR BELAKANG :

Las TIG pada dasarnya adalah pengelasan gas tungsten-arc, elektroda digunakan sebagai penyala/pengumpan busur nyala api. Elektroda tidaklah digunakan seperti pada proses pengelasan las listrik. Proses pengelasan TIG pada umumnya menghasilkan lasan yang lebih baik dari pada proses yang lain. Kelebihannya adalah bisa untuk mengelas alumunium, juga digunakan untuk mengelas jenis logam yang lain dan yang paling efektif adalah untuk mengelas logam dengan tebal 1/8 inci.

TUJUAN :

Peserta diharapkan dapat mengetahui dan memahami :
1. Prinsip dasar dan aplikasi GTAW
2. Pemilihan, persiapan dan pembentukan tungsten
3. Keistimewaan dan kerugian GTAW
4. Desain sambungan dan posisi pengelasan
5. Material, pemilihan elektroda dan pemeriksaan hasil lasan

PESERTA :
1. Juru Las (Welder).
2. Teknisi, Supervisor dan Instruktur di bidang fabrikasi dan manufaktur logam.
3. Pendidikan SLTA, STM, D-3, S-1 yang mempunyai pengalaman di bidang pengelasan logam.

CAKUPAN MATERI TRAINING GAS TUNGSTEN ARC WELDING (LAS TIG):

TEORI :
* Pendahuluan.
* Peralatan dan mesin las.
+ Persiapan elektroda.
+ Pemilihan tungsten dan persiapan
+ Pembentukan tungsten
* Gas pelindung
+ Argon, Helium
* Proses kendali
* Keistimewaan proses
+ Keuntungan
+ Kerugian
* Posisi pengelasan
* Jenis sambungan
* Prosedur pengelasan
+ Aplikasi
+ Cacat Cacat Las
* Kesehatan dan keselamatan kerja

PRAKTEK :
1. Fillet weld (sambungan T)
2. Plate weld (sambungan pelat)
3. Tube weld (sambungan pipa)

(Posisi pengelasan sesuai dengan level yang mampu dicapai).

INSTRUCTOR :

Ir. Sutrimo and team

Ir. Sutrimo dilahirkan di Jombang 5 Juli 1958. Beliau alumni dari politeknik ITB jurusan mechanical engineering & production, dan alumni dari UGM jurusan mechanical engineering. Beliau sekarang sebagai dosen di politeknik ITB(politeknik negeri Bandung,POLBAN) di jurusan mesin. Di kampus Beliau mengajar beberapa mata kuliah diantaranya machining(production), material testing and measurement, instrumentation, industrial metrology, fabrication(welding), dll. Beliau pernah memegang beberapa posisi di kampusnya, seperti head of material testing and measurement, head of industrial metrology laboratory, training manager of welding training center international certification,trainer/instructor of international welder certificate, trainer/instructor of international welding practioner, trainer/instructor of basic training welding for instructor Indonesian polytechnic and university,dan head of welding training center international certification, dll. Ir. Sutrimo sering juga mengikuti training-training
sebagai peserta untuk meningkatkan kualitas kemampuan kompetensi Beliau. Ir. Sutrimo sudah sering dan berpengalaman memberikan training-training industry untuk perusahaan-perusahaan di Indonesia.

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training gas tungsten arc welding (las tig) pasti jalan,training persiapan elektroda pasti jalan,training keistimewaan proses pasti jalan,training posisi pengelasan pasti jalan,pelatihan gas tungsten arc welding (las tig) pasti jalan,pelatihan persiapan elektroda pasti running

TRAINING GEOLOGI MINYAK DAN GAS BUMI

Training Konsep Geologi Minyak Dan Gas Bumi

Training Batasan-Batasan Dalam Eksploitasi Minyak Dan Gas Bumi

Deskripsi

Minyak dan gas bumi adalah sumber daya alam yang tidak dapat diperbaharui. Maka dari itu dalam pengambilan minyak bumi tidak boleh sembarangan, tidak boleh di eksplor berlebihan. Selain itu juga dalam proses pengeboran untuk mendapat minyak bumi tidak boleh sembarangan, harus sesuai dengan prosedur yang berlaku. Dalam dunia perminyakan, eksplorasi atau pencarian minyak bumi merupakan suatu kajian panjang yang melibatkan beberapa bidang kajian kebumian dan ilmu eksak. Untuk kajian dasar, riset dilakukan oleh para geologis, yaitu orang-orang yang menguasai ilmu kebumian. Mereka adalah orang yang bertanggung jawab atas pencarian hidrokarbon tersebut.
Secara ilmu geologi, untuk menentukan suatu daerah mempunyai potensi akan minyak bumi, maka ada beberapa kondisi yang harus ada di daerah tersebut dalam eksplorasi minyak bumi hal ini disebut kajian geologi. Jika salah satu saja tidak ada maka daerah tersebut tidak potensial atau bahkan tidak mengandung hidrokarbon. Pelatihan ini akan memberikan pemahaman mengenai geologi minyak dan gas bumi serta mengoptimalkan kemampuan perusahaan untuk mencapai tujuan strategis perusahaan.

Tujuan

Setelah mengikuti pelatihan ini, peserta diharapkan dapat :

Memahami konsep geologi minyak dan gas bumi;
Memahami batasan-batasan dalam eksploitasi minyak dan gas bumi;
Mempunyai kemampuan yang mencakup bidang perencanaan sistem produksi, serta memiliki teknik baru untuk meningkatkan produksi dan perolahan
Materi

Konsep geologi minyak dan gas bumi
Sumber minyak dan gas bumi di Indonesia
Tektonismes
Geodinamika
Metode eksploitasi geologi minyak dan gas bumi
Studi Kasus dan Diskusi
Peserta

Training ini diperuntukkan bagi:

Supervisor, Manager ataupun level di atasnya dari Perusahaan Pertambangan atau Perminyakan, ataupun divisi lainnya yang membutuhkan training ini;
Praktisi atau Profesional yang ingin menambah pengetahuan mengenai geologi minyak dan gas bumi

Instruktur
Budiarto,M.Si

JADWAL PELATIHAN 2025

BATCH 1 : 13-14 Januari 2025
BATCH 2 : 10-11 Februari 2025
BATCH 3 : 10-11 Maret 2025
BATCH 4 : 14-15 April 2025
BATCH 5 : 15-16 Mei 2025
BATCH 6 : 12-13 Juni 2025
BATCH 7 : 10-11 Juli 2025
BATCH 8 : 18-19 Agustus 2025
BATCH 9 : 17-18 September 2025
BATCH 10 : 16-17 Oktober 2025
BATCH 11 : 13-14 November 2025
BATCH 12 : 15-16 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

REGULER TRAINING
- YOGYAKARTA, Hotel Dafam Malioboro
- JAKARTA, Hotel Amaris Tendean
- BANDUNG, Hotel Golden Flower
- SURABAYA
- BALI, Hotel Ibis Kuta
- LOMBOK – NTB
ONLINE TRAINING VIA ZOOM
IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
Module / Handout training terupdate
FREE Flashdisk
Sertifikat training teknik komunikasi murah
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

Technorati Tags: training geologi minyak dan gas bumi pasti jalan,training konsep geologi minyak dan gas bumi pasti jalan,training batasan-batasan dalam eksploitasi minyak dan gas bumi pasti jalan,training metode eksploitasi geologi minyak dan gas bumi pasti jalan,pelatihan geologi minyak dan gas bumi pasti jalan,pelatihan konsep geologi minyak dan gas bumi pasti running

Category Archives: Oil & Gas

TRAINING LUBE OIL ANALYSIS AND TRIBOLOGY

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GAS TURBINE TECHNOLOGY

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GAS, OIL AND WATER PIPELINE DESIGN AND MAINTENANCE

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GAS COMPRESSION & FLOW METERING

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GAS COMPRESSOR

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GAS COMPRESSOR

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GAS CONDITIONING AND PROCESSING

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GAS, OIL AND WATER HANDLING FACILITIES

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GAS TUNGSTEN ARC WELDING (LAS TIG)

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

TRAINING GEOLOGI MINYAK DAN GAS BUMI

JADWAL PELATIHAN 2025

Investasi Pelatihan :

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

Pitaloka