TRAINING GAS COMPRESSION & FLOW METERING

TRAINING GAS COMPRESSION & FLOW METERING

TRAINING GAS COMPRESSION & FLOW METERING

Training Kompresi Gas & Pengukur Aliran

Training Reciprocating Compressors

training kompresi gas & pengukur aliran murah

Gas production operations often require compressors to raise the pressure of the gas. This is accompanied by change of state of the gas which means change in temperature and volume of a quantum of gas going under compression . The most important ofcompressors such as providing enough pressure to a gas transport through transmission and distribution systems, reinjection of gas for pressure maintenance, circulation of gas through the process or system, raising gas pressure to the required level for a chemical processing reaction,etc. The compression calculations in the natural gas industry must be accurate and its of paramount importance for the gas industry. If an error occurs even though only 1.0 percent in the measurement of natural gas in the pipeline, this will give a loss either the seller or the purchaser amount of million a year, and certainly this is a bad thing and can be detrimental to the oil & gas company. Not only compression calculation but also the accuration of flow metering is
importance. The Flow is one of the most difficult variable to measure, because it cannot be measured directly like pressure and temperature. It must be inferred by indirect means, such as pressure differential over a specified distance, speed of rotation of a rotating element, displacement rate in a measurement chamber, etc.

Course Outlines Gas Compression & Flow Metering:

Day 1

Overview of Gas Compression
* Field gas compression systems.
* Inlet gas compression prior to treating.
* Outlet gas compression prior to export pipeline.
* Compression for gas lift, gas gathering, condensate recovery,

transmission & distribution, gas re-injection & pressure maintenance.

Type of Compressor
* Positive-displacement or intermittent
* Flow and continuous flow units.
* Reciprocating compressors.
* Rotary positive-displacement and centrifugal compressors.
* Axial and mixed-flow compressors.
* Comparison between compressors and compressor selection.

Day 2

Basics and Performance of Gas Compression
* Isothermal, isentropic and polytropic ideal compression processes.
* Real gas behavior and compression ratio.
* Design and determination of the number of stages.
* Inlet flow rate and compression power calculation.
* Compressor control and performance maps.
* Nomograph for estimating compressor performance.
* Estimation of HP required for compressing natural gas.
* Performance testing guidelines for centrifugal compressors.

Day 3

Practical Guide to Accurate Flow Measurement.
* Requisites of flow measurement and reference standards .
* Custody and non-custody transfer.
* Flow installation requirements and operational considerations.
* Maintenance meter equipment, readouts and related devices.
* Proving systems and auditing.
* Accuracy, rangability and turndown.
* Head type and mechanical type.
* Electronic flowmeter and mass flowmeter.

Day 4

Practical Aspects of Flow Metering.
* Orifice plate, venturi, flow nozzle and Pitot tube.
* Variables area meters.
* Mechanical flowmeters.
* Turbin and rotary flowmeters.
* Electronic and vortex flowmeters.
* Ultrasonic flowmeters.
* Mass flowmeters.
* Coriolis flowmeters.
* Thermal mass flowmeters.

Instructor

Hilman Ahmad

This course will be conducted by Hilman Ahmad & Associates, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Bandung Industrial Oil & Gas Education Center.

He has been practicing production operation and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.

He has been delivering training course in production operation and maintenance and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING GAS COMPRESSOR

TRAINING GAS COMPRESSOR

TRAINING GAS COMPRESSOR

Training Operation Gas Compressor

Training Maintenance Gas Compressor

training operation gas compressor murah

TRAINING OBJECTIVE

After completion of the course, the participants should be able to describe and demonstrate thoroughly of gas-compressors. Identify component by names, operation, maintenance and inspection. Describe the proper care, removal alignment and installation of gas-compressors and their accessories.

WHO SHOULD ATTEND

Gas-compressor operator, supervisor, and to whom may concern in gas-compressor operation and maintenance.

TRAINING MATERIAL OUTLINE GAS COMPRESSOR : OPERATION, MAINTENANCE & TROUBLESHOOTING

* Fundamental of fluid mechanics and thermodynamic
+ Properties of fluids
+ Measurement unit
+ Basic of fluids dynamic
+ Energy losses in pipe installation
+ The gas Laws
+ Specific Heat
+ Compression process
o Isothermal
o Adiabatic
o Polytrophic
+ Compression Work
+ Multistage compression

* Pressure loss at gas pipe installation
+ Definition and accuracy
+ Factors to estimate friction loss
+ Pressure gradient in pipe
o General equation of various gas
o Natural gas piping equation
o Vacuum piping equation
+ Fitting pressure loss
+ Flexible pipe pressure loss

* Fundamental theory of compressor
+ Compressor development history
+ Compressor classification
+ Compressor work cycle
o Theoretic cycle
o Semi theoretic cycle
o Actual cycle
* Centrifugal compressor
* Head, losses and efficiency
* Characteristic at each speed
* Compressor installation

* Dynamic Compressor
+ Performance & condition definition
+ Type of centrifugal compressor
o High casing
o Horizontal split casing
o Vertical split casing
+ Package assembly
+ Multi casing unit
+ Centrifugal compressor application
+ Characteristic of centrifugal compressor
+ General detail of centrifugal compressor
o Impeller
o Diaphragm
o Inter stage packing
o Rotor assembly
o Casing
o Journal and thrust  bearing
o Shaft seals
o Seal and lubrication system
o Gas cooling
+ Pressure ratio and centrifugal characteristic curve
+ Control of capacity
o Load curve
o Control method
o Surge control
o Parallel operation
o Unloading start
+ Inner gear air centrifugal compressor
o Modulation pressure control
o Dual step capacity control
o Auto dual control
* Axial flow compressor

* Positive Compressor
+ Application of theory
o Reciprocating compressor
o Clearance control
o Clearance control and variable compression ratio
o Effect of heat specific ratio to horse power
o Peak horse power and break horse power
o Effect of compressibility
o Effect of altitude
+ Reciprocating compressor
o Definition
o Characteristic
o Classification
o Cylinder
o Valve
o Cylinder cooling
o Non-cooled cylinder
o Air cooling cylinder
o Capacity control
o Manual control
o Main automatic control
o Load depletion  to start
o Types of control
o Constant speed control
o Suction side throttling
o Variable speed control

* Installation, operation and maintenance
+ Installation
o Placement
o Suction condition
o Foundation
o Piping
o Electric cabling
+ Field testing
o Commissioning
o Running test
+ Operation
+
o Responsibility
o Recording
o Cleaning
o Lubrication
o Safety
o Initial start
o Capacity control
o Spare parts
o Trouble shooting
+ Inspection and maintenance
o Preventive maintenance
o Predictive maintenance

INSTRUCTOR

Ir. I Nengah Diasta, M.Eng. is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.

Ir. I Nengah Diasta, M.Eng.  has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

Ir. I Nengah Diasta, M.Eng.  has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc.  Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX,  Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT
TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING GAS COMPRESSOR

TRAINING GAS COMPRESSOR

TRAINING GAS COMPRESSOR

Training Operation Gas Compressor

Training Maintenance Gas Compressor

training operation gas compressor murah

TRAINING OBJECTIVE

After completion of the course, the participants should be able to describe and demonstrate thoroughly of gas-compressors. Identify component by names, operation, maintenance and inspection. Describe the proper care, removal alignment and installation of gas-compressors and their accessories.

WHO SHOULD ATTEND

Gas-compressor operator, supervisor, and to whom may concern in gas-compressor operation and maintenance.

TRAINING MATERIAL OUTLINE GAS COMPRESSOR : OPERATION, MAINTENANCE & TROUBLESHOOTING

* Fundamental of fluid mechanics and thermodynamic
+ Properties of fluids
+ Measurement unit
+ Basic of fluids dynamic
+ Energy losses in pipe installation
+ The gas Laws
+ Specific Heat
+ Compression process
o Isothermal
o Adiabatic
o Polytrophic
+ Compression Work
+ Multistage compression

* Pressure loss at gas pipe installation
+ Definition and accuracy
+ Factors to estimate friction loss
+ Pressure gradient in pipe
o General equation of various gas
o Natural gas piping equation
o Vacuum piping equation
+ Fitting pressure loss
+ Flexible pipe pressure loss

* Fundamental theory of compressor
+ Compressor development history
+ Compressor classification
+ Compressor work cycle
o Theoretic cycle
o Semi theoretic cycle
o Actual cycle
* Centrifugal compressor
* Head, losses and efficiency
* Characteristic at each speed
* Compressor installation

* Dynamic Compressor
+ Performance & condition definition
+ Type of centrifugal compressor
o High casing
o Horizontal split casing
o Vertical split casing
+ Package assembly
+ Multi casing unit
+ Centrifugal compressor application
+ Characteristic of centrifugal compressor
+ General detail of centrifugal compressor
o Impeller
o Diaphragm
o Inter stage packing
o Rotor assembly
o Casing
o Journal and thrust  bearing
o Shaft seals
o Seal and lubrication system
o Gas cooling
+ Pressure ratio and centrifugal characteristic curve
+ Control of capacity
o Load curve
o Control method
o Surge control
o Parallel operation
o Unloading start
+ Inner gear air centrifugal compressor
o Modulation pressure control
o Dual step capacity control
o Auto dual control
* Axial flow compressor

* Positive Compressor
+ Application of theory
o Reciprocating compressor
o Clearance control
o Clearance control and variable compression ratio
o Effect of heat specific ratio to horse power
o Peak horse power and break horse power
o Effect of compressibility
o Effect of altitude
+ Reciprocating compressor
o Definition
o Characteristic
o Classification
o Cylinder
o Valve
o Cylinder cooling
o Non-cooled cylinder
o Air cooling cylinder
o Capacity control
o Manual control
o Main automatic control
o Load depletion  to start
o Types of control
o Constant speed control
o Suction side throttling
o Variable speed control

* Installation, operation and maintenance
+ Installation
o Placement
o Suction condition
o Foundation
o Piping
o Electric cabling
+ Field testing
o Commissioning
o Running test
+ Operation
+
o Responsibility
o Recording
o Cleaning
o Lubrication
o Safety
o Initial start
o Capacity control
o Spare parts
o Trouble shooting
+ Inspection and maintenance
o Preventive maintenance
o Predictive maintenance

INSTRUCTOR

Ir. I Nengah Diasta, M.Eng. is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.

Ir. I Nengah Diasta, M.Eng.  has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

Ir. I Nengah Diasta, M.Eng.  has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc.  Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX,  Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT
TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING GAS CONDITIONING AND PROCESSING

TRAINING GAS CONDITIONING AND PROCESSING

TRAINING GAS CONDITIONING AND PROCESSING

Training Kondisi Gas Dan Pengolahan

Training Gas Formation Volume Factor

training kondisi gas dan pengolahan murah

OBJECTIVES :

After participate in this course, the participants will be able and capable to :
* Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
* Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
* Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
* Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:
* No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Gas Process and Operation
* Gas Properties
+ Ideal gas
+ Real Gas
+ Gas Formation Volume Factor
+ Gas Compressibility
+ Gas-Water System
+ Gas-Condensate System
* Gas Reservoir Performance
+ Reservoir Gas Flow
+ Gas Reserves
+ Well Completion Effect
+ Tight Gas Well
+ Gas Well Testing
* Gas Piping System
+ Basic  Flow Equation
+ Flow in Wells and Flow in Pipelines
+ Effect of Liquids
+ Use of Pressure Traverse Curve
+ Liquid Removal from Gas Wells
* Gas Compression
+ Type of Compressors
+ Compressor Design
+ Centrifugal Compressor

Total System Analysis
* Tubing and Flow Line Effect
* Separator Pressure Effect
* Compressor Selection

Flow Measuring
* Orifice Metering
* Metering System Design
* Other Metering Methods

Gas Condensate Reservoir
* Well Testing and Sampling
* Gas Cycling

Field Operation Problems
* Pressure Cumulative Production Plot
* Hydrate Formation
* Sour Gas Production
* Corrosion Control With Inhibitors
* Sulfur Deposition

Gas Processing
* Field treatment of Natural Gas
* Gas Plant Operation
* Gas Dehydration
* Gas Sweetening

INSTRUCTOR :

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING GAS, OIL AND WATER HANDLING FACILITIES

TRAINING GAS, OIL AND WATER HANDLING FACILITIES

TRAINING GAS, OIL AND WATER HANDLING FACILITIES

Training Fasilitas Penanganan Minyak Gas, Minyak Dan Air

Training Gas Handling Facilities

training fasilitas penanganan minyak gas, minyak dan air murah

OBJECTIVES :
After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
* Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
* Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
* Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

AUDIENCE:
No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

1.    Gas Handling Facilities
* Introduction to Gas Handling and Facilities
* Gas Properties

* Ideal gas
* Real Gas
* Gas Formation Volume Factor
* Gas Compressibility
* Gas-Water System
* Gas-Condensate System

* Gas Reservoir Performance

* Reservoir Gas Flow
* Gas Reserves
* Well Completion Effect
* Tight Gas Well
* Gas Well Testing

* Gas Piping System

* Basic  Flow Equation
* Flow in Wells and Flow in Pipelines
* Effect of Liquids
* Use of Pressure Traverse Curve
* Liquid Removal from Gas Wells

* Gas Compression

* Type of Compressors
* Compressor Design
* Centrifugal Compressor

* Total System Analysis

* Tubing and Flow Line Effect
* Separator Pressure Effect
* Compressor Selection

* Flow Measuring

* Orifice Metering
* Metering System Design
* Other Metering Methods

* Gas Condensate Reservoir

* Well Testing and Sampling
* Gas Cycling

* Field Operation Problems

* Pressure Cumulative Production Plot
* Hydrate Formation
* Sour Gas Production
* Corrosion Control With Inhibitors
* Sulfur Deposition

* Gas Processing

* Field treatment of Natural Gas
* Gas Plant Operation
* Gas Dehydration
* Gas Sweetening

2.    Oil Handling Facilities
* Oil Well Surface Production Equipment and Operation

* Oil Well Equipment
* Oil Well Production Operation
* Well Automatic Safety Device

* Oil Gathering System. Manifold and Flowline

* Oil Gathering System
* Manifold System
* Flow line Sizing and Design

* Crude Oil and Gas Separation

* Separator and Principle of Separation
* Design of Separator
* Oil Dehydration

* Principles of Measurement

* Introduction to Measurement
* Crude Oil Measurement
* Gas Measurement

* Well Test

* Introduction
* Responsibility for Test
* Preparation for Test
* Types of Well Test
* Equipment and Procedures
* Accuracy of Fluid Measurement
* Problem in Testing
* Type of Test

3.    Water Handling Facilities
* The Chemistry of Water

* Chemical and Physical Properties
* Water Sampling Procedures
* Quantitative Analysis of Oilfield Waters
* Water Analysis Techniques

* Water Formed Scales

* Why Scales Form
* Predicting Scale Formation
* Mixing Waters – Compatibility
* Preventing Scale Formation
* Scale Removal Methods

* Corrosion in Water Injection System and Disposal System

* Theory of Corrosion
* The Effect of Metal Composition
* Effect of Water Composition
* Forms of Corrosion
* Corrosion Control Methods
* Corrosion Inhibitors
* Internal Coatings and Linings for Tubular Goods
* Internal Tank Coatings and Cathodic Protection
* Non-Metallic Tubular Goods Types
* Removal of Corrosive Gases from Water
* Oxygen Removal
* Removal of Hydrogen Sulfide from Water
* Removal of Carbon Dioxide from Water
* Oxygen Exclusion
* Design to Minimize Corrosion
* Corrosion Monitoring Techniques

INSTRUCTOR :
1.     Dr.Ir. Sudjati Rachmat, DEA

CO-INSTRUCTOR :
2.     Ir. Gilang Erlangga

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,,,,

TRAINING GAS TUNGSTEN ARC WELDING (LAS TIG)

TRAINING GAS TUNGSTEN ARC WELDING (LAS TIG)

TRAINING GAS TUNGSTEN ARC WELDING (LAS TIG)

Training Persiapan Elektroda

Training Keistimewaan Proses

training persiapan elektroda murah

LATAR BELAKANG :

Las TIG pada dasarnya adalah pengelasan gas tungsten-arc, elektroda digunakan sebagai penyala/pengumpan busur nyala api. Elektroda tidaklah digunakan seperti pada proses pengelasan las listrik. Proses pengelasan TIG pada umumnya menghasilkan lasan yang lebih baik dari pada proses yang lain. Kelebihannya adalah bisa untuk mengelas alumunium, juga digunakan untuk mengelas jenis logam yang lain dan yang paling efektif adalah untuk mengelas logam dengan tebal 1/8 inci.

TUJUAN :

Peserta diharapkan dapat mengetahui dan memahami :
1. Prinsip dasar dan aplikasi GTAW
2. Pemilihan, persiapan dan pembentukan tungsten
3. Keistimewaan dan kerugian GTAW
4. Desain sambungan dan posisi pengelasan
5. Material, pemilihan elektroda dan pemeriksaan hasil lasan

PESERTA :
1. Juru Las (Welder).
2. Teknisi, Supervisor dan Instruktur di bidang fabrikasi dan manufaktur logam.
3. Pendidikan SLTA, STM, D-3, S-1 yang mempunyai pengalaman di bidang pengelasan logam.

CAKUPAN MATERI TRAINING GAS TUNGSTEN ARC WELDING (LAS TIG):

TEORI :
* Pendahuluan.
* Peralatan dan mesin las.
+ Persiapan elektroda.
+ Pemilihan tungsten dan persiapan
+ Pembentukan tungsten
* Gas pelindung
+ Argon, Helium
* Proses kendali
* Keistimewaan proses
+ Keuntungan
+ Kerugian
* Posisi pengelasan
* Jenis sambungan
* Prosedur pengelasan
+ Aplikasi
+ Cacat Cacat Las
* Kesehatan dan keselamatan kerja

PRAKTEK :
1. Fillet weld (sambungan T)
2. Plate weld (sambungan pelat)
3. Tube weld (sambungan pipa)

(Posisi pengelasan sesuai dengan level yang mampu dicapai).

INSTRUCTOR :

Ir. Sutrimo and team

Ir. Sutrimo dilahirkan di Jombang 5 Juli 1958. Beliau alumni dari politeknik ITB  jurusan mechanical engineering & production, dan alumni dari UGM jurusan mechanical engineering. Beliau sekarang sebagai dosen di politeknik ITB(politeknik negeri Bandung,POLBAN) di jurusan mesin. Di kampus Beliau mengajar beberapa mata kuliah diantaranya machining(production), material testing and measurement, instrumentation, industrial metrology, fabrication(welding), dll. Beliau pernah memegang beberapa posisi di kampusnya, seperti head of material testing and measurement, head of industrial metrology laboratory, training manager of welding training center international certification,trainer/instructor of international welder certificate, trainer/instructor of international welding practioner, trainer/instructor of basic training welding for instructor Indonesian polytechnic and university,dan head of welding training center international certification, dll.  Ir. Sutrimo sering juga mengikuti training-training
sebagai peserta untuk meningkatkan kualitas kemampuan kompetensi Beliau. Ir. Sutrimo sudah sering dan berpengalaman memberikan training-training industry untuk perusahaan-perusahaan di Indonesia.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING GEOLOGI MINYAK DAN GAS BUMI

TRAINING GEOLOGI MINYAK DAN GAS BUMI

TRAINING GEOLOGI MINYAK DAN GAS BUMI

Training Konsep Geologi Minyak Dan Gas Bumi

Training Batasan-Batasan Dalam Eksploitasi Minyak Dan Gas Bumi

training konsep geologi minyak dan gas bumi murah

Deskripsi

Minyak dan gas bumi adalah sumber daya alam yang tidak dapat diperbaharui. Maka dari itu dalam pengambilan minyak bumi tidak boleh sembarangan, tidak boleh di eksplor berlebihan. Selain itu juga dalam  proses pengeboran untuk mendapat minyak bumi tidak boleh sembarangan, harus sesuai dengan prosedur yang berlaku. Dalam dunia perminyakan, eksplorasi atau pencarian minyak bumi merupakan suatu kajian panjang yang melibatkan beberapa bidang kajian kebumian dan ilmu eksak. Untuk kajian dasar, riset dilakukan oleh para geologis, yaitu orang-orang yang menguasai ilmu kebumian. Mereka adalah orang yang bertanggung jawab atas pencarian hidrokarbon tersebut.
Secara ilmu geologi, untuk menentukan suatu daerah mempunyai potensi akan minyak bumi, maka ada beberapa kondisi yang harus ada di daerah tersebut dalam eksplorasi minyak bumi hal ini disebut kajian geologi. Jika salah satu saja tidak ada maka daerah tersebut tidak potensial atau bahkan tidak mengandung hidrokarbon. Pelatihan ini akan memberikan pemahaman mengenai geologi minyak dan gas bumi serta mengoptimalkan kemampuan perusahaan untuk mencapai tujuan strategis perusahaan.

Tujuan

Setelah mengikuti pelatihan ini, peserta diharapkan dapat :

Memahami konsep geologi minyak dan gas bumi;
Memahami batasan-batasan dalam eksploitasi minyak dan gas bumi;
Mempunyai kemampuan yang mencakup bidang perencanaan sistem produksi, serta memiliki teknik baru untuk meningkatkan produksi dan perolahan
Materi

Konsep geologi minyak dan gas bumi
Sumber minyak dan gas bumi di Indonesia
Tektonismes
Geodinamika
Metode eksploitasi geologi minyak dan gas bumi
Studi Kasus dan Diskusi
Peserta

Training ini diperuntukkan bagi:

Supervisor, Manager ataupun level di atasnya dari Perusahaan Pertambangan atau Perminyakan, ataupun divisi lainnya yang membutuhkan training ini;
Praktisi atau Profesional yang ingin menambah pengetahuan mengenai geologi minyak dan gas bumi

Instruktur
Budiarto,M.Si

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING GEOLOGI MINYAK DAN GAS BUMI

TRAINING GEOLOGI MINYAK DAN GAS BUMI

TRAINING GEOLOGI MINYAK DAN GAS BUMI

Training Konsep Geologi Minyak Dan Gas Bumi

Training Batasan-Batasan Dalam Eksploitasi Minyak Dan Gas Bumi

training konsep geologi minyak dan gas bumi murah

Deskripsi

Minyak dan gas bumi adalah sumber daya alam yang tidak dapat diperbaharui. Maka dari itu dalam pengambilan minyak bumi tidak boleh sembarangan, tidak boleh di eksplor berlebihan. Selain itu juga dalam  proses pengeboran untuk mendapat minyak bumi tidak boleh sembarangan, harus sesuai dengan prosedur yang berlaku. Dalam dunia perminyakan, eksplorasi atau pencarian minyak bumi merupakan suatu kajian panjang yang melibatkan beberapa bidang kajian kebumian dan ilmu eksak. Untuk kajian dasar, riset dilakukan oleh para geologis, yaitu orang-orang yang menguasai ilmu kebumian. Mereka adalah orang yang bertanggung jawab atas pencarian hidrokarbon tersebut.
Secara ilmu geologi, untuk menentukan suatu daerah mempunyai potensi akan minyak bumi, maka ada beberapa kondisi yang harus ada di daerah tersebut dalam eksplorasi minyak bumi hal ini disebut kajian geologi. Jika salah satu saja tidak ada maka daerah tersebut tidak potensial atau bahkan tidak mengandung hidrokarbon. Pelatihan ini akan memberikan pemahaman mengenai geologi minyak dan gas bumi serta mengoptimalkan kemampuan perusahaan untuk mencapai tujuan strategis perusahaan.

Tujuan

Setelah mengikuti pelatihan ini, peserta diharapkan dapat :

Memahami konsep geologi minyak dan gas bumi;
Memahami batasan-batasan dalam eksploitasi minyak dan gas bumi;
Mempunyai kemampuan yang mencakup bidang perencanaan sistem produksi, serta memiliki teknik baru untuk meningkatkan produksi dan perolahan
Materi

Konsep geologi minyak dan gas bumi
Sumber minyak dan gas bumi di Indonesia
Tektonismes
Geodinamika
Metode eksploitasi geologi minyak dan gas bumi
Studi Kasus dan Diskusi
Peserta

Training ini diperuntukkan bagi:

Supervisor, Manager ataupun level di atasnya dari Perusahaan Pertambangan atau Perminyakan, ataupun divisi lainnya yang membutuhkan training ini;
Praktisi atau Profesional yang ingin menambah pengetahuan mengenai geologi minyak dan gas bumi

Instruktur
Budiarto,M.Si

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

TRAINING GPS (GLOBAL POSITIONING SYSTEM) FOR MINING AND PETROLEUM PRINCIPLES, EQUIPMENT, DATA COLLECTING, DATA PROCESSING, AND APPLICATION

TRAINING GPS (GLOBAL POSITIONING SYSTEM) FOR MINING AND PETROLEUM PRINCIPLES, EQUIPMENT, DATA COLLECTING, DATA PROCESSING, AND APPLICATION

TRAINING GPS (GLOBAL POSITIONING SYSTEM) FOR MINING AND PETROLEUM PRINCIPLES, EQUIPMENT, DATA COLLECTING, DATA PROCESSING, AND APPLICATION

Training Gps (Global Positioning System) Untuk Pertambangan Dan Minyak Bumi: Prinsip, Peralatan, Pengumpulan Data, Pemrosesan Data, Dan Aplikasi

Training Sistem Koordinat Dan Datum Referensi

training gps (global positioning system) untuk pertambangan dan minyak bumi: prinsip, peralatan, pengumpulan data, pemrosesan data, dan aplikasi murah

SASARAN PELATIHAN :
1. peserta dapat mengetahui system koordinat dan referensi yang digunakan dalam GPS dan hubungannya dengan system koordinat pada proyeksi peta (seperti UTM)
2. peserta dapat mengetahui komponen GPS (satelit, pengendali dan receiver)
3. peserta dapat mengetahui fungsi dan merangkai elemen sebuah receiver GPS
4. peserta dapat merancang survai GPS
5. peserta dapat melakukan pengukuran/pengamatan GPS
6. peserta dapat melakukan transfer data dari alat GPS ke komputer (downloading)
7. peserta dapat mengelola data GPS dengan piranti lunak tertentu
8. peserta dapat mengembangkan aplikasi survei GPS

SIAPA SEBAIKNYA MENGHADIRI TRAINING INI?
Peserta pelatihan sebaiknya pernah berpengalaman dibidang survei-pemetaan dan telah terbiasa menggunakan komputer atau pihak-pihak yang merasa berkepentingan untuk mengetahui hal-hal yang berkaitan dengan GPS.

TRAINING MATERIAL OUTLINE /SYLLABUS :
1. Sistem koordinat dan Datum Referensi
2. Konstelasi dan Elemen GPS
3. Jenis dan Tipe Receiver GPS
4. Sinyal dan Data Pengamatan GPS
5. Kesalahan dan Bias GPS
6. Penentuan Posisi dengan GPS
7. Perencanaan Survei GPS
8. Pengolahan data GPS
9. Penentuan Posisi dengan GPS
10. Pengenalan Alat GPS
11. Perencanaan dan Penyuluhan
12. Pengukuran/Pengambilan data

TRAINING INSTRUCTOR
Dr. Ir. Wedyanto Kuntjoro, M.Sc. is graduated from Geodesy Engineering Department Bandung Institute of Technology (ITB) for his Bachelor, from University of Tokyo Japan for his master program and Kyoto University Japan for his Doctorate program. And till now he is lecturer and head of department at Geodesy and Geomatics Engineering Department ITB. His expertise is Geodesy Meteorology and satellite geodesy. Dr. Ir. Wedyanto Kuntjoro, M.Sc. is active trainer for GPS related topics and he has done many projects related to GPS and survey.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,,,,,,,,,,

TRAINING HEALTH AND SAFETY IN OIL & GAS

TRAINING HEALTH AND SAFETY IN OIL & GAS

TRAINING HEALTH AND SAFETY IN OIL & GAS

Training Kesehatan Dan Keselamatan Di Minyak & Gas

Training Health Promotion

training kesehatan dan keselamatan di minyak & gas murah

MATERI PELATIHAN HEALTH AND SAFETY IN OIL & GAS

1. OCCUPATIONAL HEALTH AND SAFETY INTRODUCTION.
Tinjauan umum Keselamatan dan Kesehatan Kerja dari sisi peraturan perundangan, best practices & relevansi dalam pencapaian pekerja sehat, aman dan produktif.

2. HEALTH AND SAFETY HAZARDS IN OIL AND GAS BUSINESS.
Identifikasi faktor risiko keselamatan& kesehatan kerja di sector MIGAS baik pemaparan teradap faktor fisik, kimiawi dan biologic, ergonomic serta injury.

3. MEDICAL SURVEILLANCE.

Membahas pemantauan kesehatan yang terkait jabatan serta mengelola data & tindak lanjut hasil pemeriksaan kesehatan sesuai dengan persyaratan peraturan perundangan. Mendiskusikan dasar-dasar penetapan Fitness Status para pekerja, berdasarkan standar best practices yang berlaku.
4. APPLIED ERGONOMICS IN OIL AND GAS

Pekerja di sektor MIGAS mempunyai risiko terhadap trauma akibat factor ergonomi. Prosedur kerja yang benar di perlukan untuk mengurangi risiko ini.
5. EMERGENCY RESPONSE PLAN

Mengingat risiko terhadap Keselamatan dan Kesehatan Kerja yang tinggi disektor ini, maka rencana tanggap darurat termasuk dalam bidang medis di sector ini sangatlah penting dikembangkan.
6. HEALTH PROMOTION.

Hampir dipastikan bahwa bekerja dibidang ini merupakan pekerjaan seumur hidup, dimana pekerja bekerja sampai usia pensiun. Dengan risiko kemungkinan mendapatkan injury atau penyakit baik akibat kerja sangat tinggi kemungkinannya, sehingga membutuhkan pendidikan atau training agar pekerja mampu menjaga kesehatannya dan selalu dalam keadaan sehat walafiat.
7. EMPLOYEE ASSISSTANCE PROGRAM

Bekerja di sector ini, kemungkinan mengalami stress sangat besar, dan dapat menyebabkan meningkatnya injury di kalangan pekerja. Karena itu konseling di bidang ini diperlukan untuk menjaga tingkat produktifitasnya agar tetap tinggi.

SASARAN PESERTA

Operator di lapangan bidang storage and handling, purchasing, inspection, maintenance dan SHE (Safety, Health and Environment)

TRAINING METHOD

Presentation, Discussion, Case Study, Evaluation

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2026

  • BATCH 1 : 05-06 Januari 2026 | 19-20 Januari 2026
  • BATCH 2 : 02-03 Februari 2026 | 18-19 Februari 2026
  • BATCH 3 : 09-10 Maret 2026 | 25-26 Maret 2026
  • BATCH 4 : 06-07 April 2026 | 27 – 28 April 2026
  • BATCH 5 : 04-05 Mei 2026 | 18-19 Mei 2026
  • BATCH 6 : 08-09 Juni 2026 | 22-23 Juni 2026
  • BATCH 7 : 06-07 Juli 2026 | 20-21 Juli 2026
  • BATCH 8 : 03-04 Agustus 2026 | 19-20 Agustus 2026
  • BATCH 9 : 07-08 September 2026 | 21-22 September 2026
  • BATCH 10 : 05-06 Oktober 2026 | 19-20 Oktober 2026
  • BATCH 11 : 02-03 November 2026 | 16-17 November 2026
  • BATCH 12 : 07-08 Desember 2026 | 14-15 Desember 2026

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,

Tanyakan pada kami ?

Kami di sini untuk membantu Anda! Jangan ragu untuk menanyakan apapun kepada kami. Klik di bawah untuk memulai obrolan.

Marketing

Yulianti

Online

Yulianti

Hai, tanyakan pada kami ? 00.00