TRAINING RISK BASED INSPECTION (RBI)

TRAINING RISK BASED INSPECTION (RBI)

TRAINING RISK BASED INSPECTION (RBI)

Training Risk Management

Training Pengenalan Risk Based Inspection (Rbi)

training risk management murah

INTRODUCTION RISK BASED INSPECTION (RBI)

Risk-Based Inspection is a systematical process that identifies, assesses and map  industrial risks, which can compromise equipment integrity in both pressurized  equipment and structural elements. The high risk equipments are then managed by a  proper inspection interval, method and coverage. In the RBI philosophy, it is more cost- effective to allow some systems to fail as long as the consequences of the failure are  low, on the other hand, some systems may have such high consequences of failure  that failure is totally unacceptable, and therefore, these items should receive most  attention by using a proper inspection plan & practice. In this course API 581 and API  580 and other DNV and ABS guidelines and recommended practices, will be consulted.

TRAINING MATERIAL OUTLINE RISK BASED INSPECTION (RBI)

1. Defining boundary system to be assessed
2. Screening operating unit within a plant to identify area of high risk.
3.  Identifying the damage mechanism operative
4. Determining the technical module sub-factor and likelihood of failures
5.  Determining the hazard areas and consequence of failure
6. Estimating a risk value of each equipment, tabulated and ranked
7. Prioritizing the equipment maintenance based on a the measured risk
8. Designing an appropriate inspection program.
9. Systematically managing the risk equipment failures.

TRAINING BENEFIT :
* Increased knowledge of equipment which may pose a potential risk.
* More reliable equipment and plant operation.
* Increased safety.
* Cost optimization through switching to non-invasive inspection techniques.
* Possibility to tailor shutdown scope.
* Option to extend run lengths where applicable national regulations permit it.
* Increased teamwork during the implementation process.
* Development of a knowledge database including equipment design, process features, damage mechanisms and inspection strategies

WHO SHOULD ATTEND THIS TRAINING?

Plant and Pipeline Operators, Supervisors, Engineers and Manager or every one who should know this topic.

TRAINING INSTRUCTOR

Dr. Ahmad Taufik, M.Eng.
Dr.Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and  Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager,  PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity  research for pipeline, mechanical and pressurized system. He is member of
ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia 2025

  • BATCH 1 : 13-14 Januari 2025 | 22-23 Januari 2025
  • BATCH 2 : 10-11 Februari 2025 | 13-14 Februari 2025
  • BATCH 3 : 10-11 Maret 2025 | 17-18 Maret 2025
  • BATCH 4 : 14-15 April 2025 | 16-17 April 2025
  • BATCH 5 : 15-16 Mei 2025 | 26-27 Mei 2025
  • BATCH 6 : 12-13 Juni 2025 | 19-20 Juni 2025
  • BATCH 7 : 10-11 Juli 2025 | 16-17 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025 | 21-22 Agustus 2025
  • BATCH 9 : 17-18 September 2025 | 22-23 September 2025
  • BATCH 10 : 16-17 Oktober 2025 | 29-30 Oktober 2025
  • BATCH 11 : 13-14 November 2025 | 20-21 November 2025
  • BATCH 12 : 15-16 Desember 2025 | 22-23 Desember 2025

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,