TRAINING SURFACE PRODUCTION OPERATION & EQUIPMENT

TRAINING SURFACE PRODUCTION OPERATION & EQUIPMENT

TRAINING SURFACE PRODUCTION OPERATION & EQUIPMENT

Training Peralatan & Peralatan Produksi Permukiman

Training Surface Production Operation And Equipments

training peralatan & peralatan produksi permukiman murah

OBJECTIVES :

After completion of this course, the participants will be able and capable to :
1. Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE/PARTICIPANTS :
No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :

1.    Gas Surface Production Operation and Equipments
* a.    Introduction to Gas Handling and Facilities
* b.    Gas Properties
+ Ideal gas
+ Real Gas
+ Gas Formation Volume Factor
+ Gas Compressibility
+ Gas-Water System
+ Gas-Condensate System
* c.    Gas Reservioir Performance
+ Reservoir Gas Flow
+ Gas Reserves
+ Well Completion Effect
+ Tight Gas Well
+ Gas Well Testing
* d.    Gas Piping System
+ Basic  Flow Equation
+ Flow in Wells and Flow in Pipelines
+ Effect of Liquids
+ Use of Pressure Traverse Curve
+ Liquid Removal from Gas Wells
* e.    Gas Compression
+ Type of Compressors
+ Compressor Design
+ Centrifugal Compressor
* f.    Total System Analysis
+ Tubing and Flow Line Effect
+ Separator Pressure Effect
+ Compressor Selection
* g.    Flow Measuring
+ Orifice Metering
+ Metering System Design
+ Other Metering Methods
* h.    Gas Condensate Reservoir
+ Well Testing and Sampling
+ Gas Cycling
* i.    Field Operation Problems
+ Pressure Cumulative Production Plot
+ Hydrate Formation
+ Sour Gas Production
+ Corrosion Control With Inhibitors
+  Sulfur Deposition
* j.    Gas Processing
+ Field treatment of Natural Gas
+ Gas Plant Operation
+ Gas Dehydration
+ Gas Sweetening

2.    Oil Surface Production Operation and Equipments
* a.    Oil Well Surface Production Equipment and Operation
+ Oil Well Equipment
+ Oil Well Production Operation
+ Well Automatic Safety Device
* b.    Oil Gathering System. Manifold and Flowline
+ Oil Gath ring System
+ Manifold e System
+ Flowline Sizing and Design
* c.    Crude Oil and Gas Separation
+ Separator and Principle of Separation
+ Design of Separator
+ Oil Dehydration
* d.    Principles of Measurement
+ Introduction to Measurement
+ Crude Oil Measurement
+ Gas Measurement
* e.     Well Test
+ Introduction
+ Responsibility for Test
+ Preparation for Test
+ Types of Well Test
+ Equipment and Procedures
+  Accuracy of Fluid Measurement
+ Problem in Testing
+ Type of Test
* f.    Artificial Lift Method
+ Gas Lift
+ Submersible Pump
+ Succker Rod Pump
+ Hydraulic Pump

3.    Cases study and discussion

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training.Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Jadwal Pelatihan Nisbi Indonesia  2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024

Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024

Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024

Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024

Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024

Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024

Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA, Hotel Dafam Malioboro
    • JAKARTA, Hotel Amaris Tendean
    • BANDUNG, Hotel Golden Flower
    • SURABAYA
    • BALI, Hotel Ibis Kuta
    • LOMBOK – NTB
  • ONLINE TRAINING VIA ZOOM
  • IN HOUSE TRAINING

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training membuat dan menggunakan rencana pengembangan diri murah :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training terupdate
  • Module / Handout training terupdate
  • FREE Flashdisk
  • Sertifikat training teknik komunikasi murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Technorati Tags: ,,,,,